Industrial Grade Solar Pool Heating System. 4′ X 7.5. Our inventory supply is one of the largest and most diverse in the nation. We house many different sizes & brands – we are capable of custom building virtually ANY package you need! Manufactured using a patented over-molding process whereby the headers and riser tubes become one piece, making the collectors extremely durable. Certified to withstand strong wind, violent storms are no match for SwimJoy’s durable panels and mounting method. Strap-free mounting pad system minimizes penetration points, increases aesthetic appeal. Water escapes completely, preventing freezing and cracked tubes. Separated tube design is less susceptible to “pinhole” leaks from freeze damage. Systems do still need to be plumbed properly and drained (winterized) in cold weather climates. SwimJoy panels are less susceptible to freeze damaged riser tubes, however this does not mean they 100% freeze-proof. Each tube opens directly into the header increasing flow and eliminating back-pressure. Lower head pressure keeps pumping requirements to a minimum which helps maximize efficiency. Eliminates wear and tear on pool pumps. Panels float above the roof, allowing it to breath and stay clean and dry. Innovative panel mounting system minimizes roof connections. One-piece panel design and superior mounting system eliminates the need for rubber hoses and metal hose clamps that require regular maintenance and replacement. Wide Range of Panel Sizes. Panels are available in a multitude of sizes to fit any roof size and blend nicely with your home. We are capable of packaging any combination of panel sizes needed to fit ANY unique installation requirements you may have. Available sizes: 4′ X 6.5′, 4′ X 7.5′, 4′ X 9.5′, 4′ X 10.5′, 4′ X 12.5′, 1′ X 7.5′, 1′ X 10.5′, 1′ X 12.5. When it comes to residential pool heating, SwimJoy provides homeowners with one of the best solar options available today. SwimJoy’s specialized system is extremely durable, energy efficient, freeze resistant, virtually maintenance-free & designed to withstand extremely strong storm winds. A technologically advanced design makes SwimJoy one of the most efficient, maintenance-free solar pool heating systems on the market. An energy efficient design provides year-round pool heating in warm climates and extends the swim season in colder climates. Thanks to the reliability, efficiency, and durability of its state-of-the-art system, you can entertain, exercise, and create great memories, worry free. Strapless Flush Mounting to Any Roof Type! Specialized Mounting System Changes the Game. SwimJoy solar pool heaters feature a distinct, sleek design showcased by its specialized mounting pad system. Each panel contains a mounting rail molded directly into the manifold, allowing for a greater degree of flexibility with mounting hardware locations, especially useful for tile roof installations. Specialized mounting pads allow for strapless flush mounting to any roof type, minimize roof penetrations and allow for expansion and contraction. SwimJoy’s innovative mounting system withstands violent storm winds without the need of tie-down strap. Not only are strapless mounts much more aesthetically appealing, the elimination of strapping also minimizes the number of roof connections, making SwimJoy one of the most roof-friendly systems available. SwimJoy installations are completely strap free! An individual tube design allows roofs to breathe, preventing moisture buildup and virtually eliminating wind loads. Furthermore, each panel contains a mounting sled every twelve inches down the length of the panel. These sleds prevent panel distortion and riser tube abrasion over time while also adding strength to the unit. Maximum Efficiency + Longer Operating Life. Its All About Flow! SwimJoy features an open flow design with each and every individual tube opening directly into the header, increasing flow and virtually eliminating backpressure, saving wear and tear on your pool pump. An individual tube design allows riser tubes to expand and contract independently; eliminating cracks and leaks due to wear and tear from thermal expansion and contraction. Low head-loss riser tubes eliminate high head pressures, maximize efficiency, and protect against clogging. The round design also captures more heat. SwimJoy’s unique square header shape maximizes flow and increases efficiency. Headers and risers are molded together forming one solid piece, eliminating seams and welds that can crack with age and stress. This produces the strongest possible connection and ensures a low maintenance system. The Industries Best Method for Connecting Panels & Piping! Panel clamps also allow the panels to be mounted closer together for a more efficient and attractive system. A Global Leader in Solar Pool Heating System Design. Manufactured by Magen Eco Energy. SwimJoy is built and designed by Magen Eco Energy, one of the most renown solar pool heating manufacturers in the world. Magen provides both residential and commercial solar solutions to countless swimming pools across the globe. Industry Leading Product Protection. Many options exist for heating your swimming pool either with or without solar. SwimJoy provides homeowners with a solution they can rely on without needing to compromise in one category to achieve another. SwimJoy won’t heat your pool at night or during harsh winter conditions, however it will provide among the highest quality results in the industry with one of the world’s most trusted names behind it. You really can rest assured with SwimJoy. NSF-50: Ensures the safety and performance of its products when used for public schools, spas, and recreational water facilities. ISO 9001: Quality Management Standards. ISO 14001: Environmental protection by the International Organization for Standardization. SRCC OG-400: The most current standard; this certification is a mark of quality, safety, durability and proper integration with pool designs and plumbing systems. EACH DIY KIT INCLUDES EVERYTHING YOU NEED TO. Install the selected number of solar panels in a single row. Mount each solar panel to your preferred installation surface (roof or rack). Make water connections to and from each panel. Make water connections to the systems’ supply and return plumbing lines. The pipe adapters connecting the system piping to the panels are high temperate CPVC. Contains the parts necessary to aid in gravity drainage of the panels and piping. THE FOLLOWING COMPONENTS ARE INCLUDED IN EACH DIY KIT. Contains the parts necessary for installing a solar pool panel to a supporting surface and making water connections from one panel to another. One (1) panel kit is included for each solar panel. Each Panel Kit contains. (2) Mounting Pad, Top Header. (2) Mounting Pad, Bottom Header. (2) PPC, Panel Clamp Assembly. Row Kit: Contains the parts necessary for making water connections from a row of solar pool heating panels to the systems supply and return plumbing lines. One (1) row kit is included for each system. Each Row Kit contains. (2) Pipe Connector, CPVC. Vacuum Relief Valve Attachment Set. One (1) set is included for each system. Each Vacuum Relief Valve Attachment Set contains. (1) Vacuum Relief Valve, 3/4 MPT. (1) Reducer Bushing, Spigot X FPT, 2″ X 0.75″. (1) PVC Pipe Fitting, Tee, Slip X Slip X Slip, White, 2. Please verify you have selected the correct size before processing your order. WHAT SIZE SYSTEM DO I NEED? Step 1 – Overview. A few different variables should be considered when selecting a solar pool heating system to match your swimming pool. The primary factors are; your location (climate), pool size (surface area), and heating goals (how long your looking to extend your swimming season). Understanding exactly what your goals are will help determine how many panels you need and which system to ultimately select. Solar pool heaters are available in a couple different types, each with its own advantages and “ideal fit”. Because solar pool heating systems are dependent on weather and sunlight, these figures can only be used as an estimation, they cannot be guaranteed. Step 2 – Measure Your Swimming Pool. Solar pool heating systems are sized based on the. Of your swimming pool, rather than its volume. This is because the primary source of heat loss occurs through evaporation at the surface. If you have a geometrically shaped pool, this calculation is quite easy. If however, your swimming pool is a “freeform” shape, or a “kidney” shape, this calculation can be a bit more difficult. For pools matching this second classification, see our step-by-step instructions for using Google Maps to measure your pool (Step 2B). Formulas for Geometrically Shaped Pools. Pr² (radius being half the diameter of your pool, p=3.14). L x W (length x width). Step 3 – Calculate Solar Coverage, “Offset”. Generally speaking, solar pool heating systems are sized anywhere between 50%-100% of a swimming pools total surface area. IE: “50% offset” means you are matching 50% of your pool’s surface area to the total surface area of all your solar panels. If your pool has a total surface area of 400 square feet, 50% offset means you will need a total of 200 square feet of solar panels to heat it. As a reference; a single 4′x12.5′ solar panel has a surface area of 50 square feet, so a system with (4) 4′x12.5′ solar panels has a total surface area of 200 square feet. 3-4 Month Swimming Season. If you are only looking to add some additional heating during the summer months (3-4 months of warm swimming pool temperatures), 50% offset should be sufficient. 4-6 Month Swimming Season. If you are looking to heat your pool into the shoulder months (4-6 month swimming season), you will want to aim in the 60-80% range. 8-10 Month Swimming Season. If you are looking for a full spring-fall season extension (8-10 month swimming season), you will want to aim for 85%-100% offset. Step 4 – Climate Considerations. When it comes to location (climate), you will want to consider how cold/long your winter months are. Solar systems only work when the sun is out and shinning, they also need to be winterized (drained & isolated) for the winter months when temperatures drop below 42 degrees. They also need to be isolated when pools are shut down for the winter. For this reason, not all climate zones are capable of achieving a full spring through fall season extension. If you live in one of these colder climates, you will not be able to run your solar heater during these cold months when temperatures drop near freezing or below. If you are only able to keep your system running for 4-6 months a year, 50%-80% offset will be more than sufficient. Step 5 – Optimizing Efficiency. Other factors to consider are what direction the panels will be facing, how they are plumbed, and the amount of sun exposure each day. Solar pool heating systems will perform at optimal performance when the system is facing south, plumbed in parallel (if possible; to achieve a higher flow rate), and the system has full exposure during the day. If the panels are installed on a ground structure (ground rack), you will want a solid substrate beneath the panels to keep any wind from passing through the riser tubes (reduces wind load on the panels & restricts heat loss). Also, be sure the system is never installed at a pitch greater than 45 degrees (the angle the sunlight hits the panels does make a difference; efficiency nearly drops off the map once the pitch exceeds this maximum). Step 2B – Measuring Your Pool w/ Google Maps. How to Size Your Swimming Pool with Google Maps. Go to Google Maps. Type your address into the search bar and hit enter. Zoom into your address with either the mouse wheel or the (+/-) buttons located in the lower right-hand corner. To Edit Your Selection. You can move a selected point by clicking on the node, holding the mouse button, and moving it to the desired location. You can also erase and start over by right clicking anywhere on the screen and hitting “clear measurement”. This is the surface area that will be used to calculate what size system you need. Google Maps Example Pool Measurement. This tool also works well for measuring available roof space. (Satellite imaging provides pretty accurate measurements; however, they are not always 100% accurate and roof measurements should always be double checked by hand if possible). Our mission is to provide an outstanding customer experience from start to finish. Our team of dedicated experts are available to assist with any questions you have, at any point in your project. We offer design & consultation services free of charge, simply give us a call or send us a message. Our primary objective is to help you identify the best possible solar solution that will achieve your heating goals, while also providing the best possible fit to your roof type and climate. Here is a list of a few of the items we provide to our customers on a daily basis. Advanced design and layout services. Want to make sure your system is optimized for your climate, roof & heating goals? Plumbing design & tie-in assistance. Design & performance optimization. Pump sizing & speed considerations. Metal roofs, tile roofs, pergolas, ext. Achieving proper automatic gravity drainage. Winterizing systems in cold weather climates. Automation units, heat pumps, ext. At Solar Pool Supply, we are constantly seeking new and inventive ways of pioneering previously untouched challenges in the solar pool heating industry. We began with a renovation of the DIY market by custom packaging the industries leading brands into complete “do it yourself” kits for inground swimming pools. Systems of this caliber had previously only been available to select areas of the country by a professional installer. We have come a long way and have succeeded in making it possible for a homeowner anywhere in the world to have access to these very same systems, all without the need of a contract! What Hardware Do I Need? The items listed below are generally required if you are installing a full solar pool heating system (new or replacement system). If you are simply replacing a couple old/damaged panels within an existing array, see “Repair & Replacement Components”. Contains the parts necessary for installing a SwimJoy solar pool panel to a supporting surface and making water connections from one panel to another. One (1) panel kit is required for each solar panel in the array. Each SwimJoy Panel Kit contains. One (1) row kit is required for each row (bank) of solar pool heating panels in the array. If you are installing your panels in multiple rows, you will need one row kit per row of panels. One (1) set is required for each system. The items listed below may be needed in addition to the items supplied in each DIY kit IF you are installing a new system from scratch (do not have a pre-existing solar pool heater), OR have specific installation requirements due to available roof spacing i. E: if you need to split the panels into multiple rows or need to bypass an obstruction like a roof or skylight. We also have supplemental high-wind add-on kits available for those living in. High-wind/storm climates and need additional mounting security. Manual Temperature Control Plumbing Kit. Contains the valve’s necessary for manual temperature control of your solar pool heating system. A 3-port diverter valve is manually adjusted to turn solar on and off. Two isolation valves are used to completely shut off solar for maintenance and winterization (prevents water from entering the solar panels). The check valve is used to prevent water from flowing backwards through your pump & filter. Includes premium Pentair lube-free valve’s, 2? E ach manual temperature control plumbing kit contains. (1) Pentair 3-Port Solar Valve w/ Drain Down, CPVC, 2? (1) Pentair 2-Port Check Valve, CPVC, 2? (2) Pentair 2-Port Isolation Valve, Positive Seal, CPVC, 2? High-Wind Add-On Panel Kit. Recommended for installation sites with frequent high-wind or storm weather conditions. Supplemental high-wind panel kits are used in conjunction with standard panel kits to provide the parts necessary to secure each of SwimJoy’s 8 mounting rails (4-top & 4-bottom) to the installation surface. Features extra-wide top header mounting pads and additional bottom mounting pads for maximum security. One (1) high-wind add-on panel kit is required for each solar panel in the array. Each High-Wind Add-On Panel Kit contains. (4) Extra-Wide Top Mounting Pads. (2) Bottom Mounting Pads. Row Spacer Kit: Contains the parts necessary to bypass mounting surface obstructions larger than 6 such as roof vents, skylights and exhaust fans. Allows the connection of PVC pipe between the panels to provide proper clearance of the obstruction. One (1) Row Spacer Kit is required for each split in a row of solar panels. Each Row Spacer Kit contains. (4) Pipe Connector, CPVC. PVC Pipe Support Bracket. Optional component used for supporting feed and return line PVC piping on the roof or other mounting surfaces. Each bracket includes a specialized wedge attachment that allows for the natural expansion and contraction of the pipe as it heats up and cools down. Includes flashing base to support lag bolt attachment to the mounting surface and provide enhanced seal. Also used to create a low-profile, aesthetically pleasing installation. REPAIR & REPLACEMENT COMPONENTS. The items listed below are used if you are replacing old/damaged panels within an existing array, or need to repair damaged or leaking solar panels or hardware components. Patented panel clamp connection design eliminates the need for traditional rubber hose connections that deteriorate over time, requiring regular maintenance and replacement. This low-profile connection style also drastically improves the aesthetics of installations; producing a cleaner, more attractive system. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Makes header-to-header panel connections without any gap. (panels connect directly next to each other). Used to make attachments with end caps & pipe connectors. Used to attach PVC Pipe to the solar pool heating system. This is generally done at the supply and return connection points, however it can also be done to space out panels around larger roof obstructions (see row spacer kit). Pipe connectors attach the header of a solar panel (via panel clamp assembly) to either a PVC coupling, or directly to PVC pipe (depending on pipe size). 2 SCH40 PVC Pipe connects with a PVC coupling. 1.5 SCH40 PVC Pipe is slip fit directly into pipe connector. Used to cap off the end of a solar pool heating system array (bank/row of panels). For most applications, one (1) is used on the end opposite the supply connection, and one (1) is used on the end opposite the return connection. Attaches to the panel header via panel clamp assembly. Allows air to enter the solar pool heating system when the pool pump shuts off to facilitate automatic gravity drainage of the panels and pipe. This is an extremely important aspect of solar pool heating systems to prevent freeze damage, as well as keep air from stagnating within the panels and piping. Allows for automatic gravity drainage of the panels and piping system must be installed in a manner which allows for this functionality. Prevents freeze damage and keeps air from stagnating. Prevents damage to the solar pool heating system by allowing air to enter the system when the pump shuts off, preventing the formation of a vacuum. Solar Panel Repair Tool Kit. Includes all the necessary tools and plugs to repair SwimJoy solar pool heater panels with damaged riser tubes. Maintains the uniform appearance of the panel. Includes chisel, plug insertion tool. & 12 repair plugs. (2) plugs are required for each riser tube repair; (1) at the top & (1) at the bottom. Replacement plug pack, used to repair SwimJoy solar pool heater panels with damaged riser tubes. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “solarpoolsupply” and is located in this country: US. This item can be shipped to United States.
- Country/Region of Manufacture: Israel
- Custom Bundle: Yes
- Power Source: Solar
- Type: Solar Pool Heater DIY Kit
- MPN: 2-1100-030_4
- Manufacturer: Magen eco-Energy
- Panel Volume Capacity: 2.4 Gallons / Panel
- Burst Pressure: 270 PSI
- Working Pressure: 90 PSI
- Manifold Diameter: 2” O.D.
- Panel Size: 4′ x 7.5′
- Brand: SwimJoy
- Suitable For: Above Ground Pools, In Ground Pools
- Modified Item: No
- Panel Type: Separated Tube Design
- Product Type: Solar Pool Heating System DIY Kit
- Header Width: 48.41”
- Warranty Guarantee: 12-Year Limited + Bonus Lifetime Limited
- Kit Size (Solar Coverage): 120 Square Feet
- Panel Length: 91.94”
- Panel Dry Weight: 16 Lbs. / Panel
- Recommended System Flow Rate: 12 Gallons Per Minute
- Bundle Description: (4) 4′x7.5′ SwimJoy Solar Panels, (4) Panel Installation Kits, (1) Row Install Kit, (1) Vacuum Relief Valve Attachment Set
- UPC: 783515921946
