Monthly Archives: April 2023

Replacement Cell compatible with Pentair® IntelliChlor® IC20® 520554 Cells (Aftermarket Cell). Power: 1.1 lbs/day. 10000 Hours Rated Lifespan. 20000 Gallons Max Capacity. Upgrade to more power and a digital display! Digital – LED Screen. Yes – Displays PPM, High, Low. Yes, Built-in Flow Switch. Designed for Outdoor Installation and Operation. The generic Pentair IntelliChlor controls are built-in to the electrolytic cell. It has a bright LED screen that that displays the actual measured salt levels, ten sanitizer output power levels, and LED indicator lights to display if there is an issue with the salt level, water flow, water temperature, or whether the cell requires checking or service. The controls also have a built-in mechanical flow switch that ensure sufficient water flow for chlorine generation. Under low water temperature conditions, the control’s automatic shut-off feature protects the unit and prolongs cell life. The generic Pentair IntelliChlor electrolytic cell is an inline opaque-plastic housing which contains built-in titanium electrode plates, built-in electronic controls, built-in flow switch, and built-in power supply cord. The generic IntelliChlor salt cell has threaded connections on the inlet and outlet, which allows direct replacement of original OEM Pentair Intelli Chlor salt cells and quick access for service or winter removal (if applicable). The threaded connections attach to the original unions which are glued to the existing return-line PVC plumbing. The generic replacement salt cell compatible with Pentair IntelliChlor® models is a great way to upgrade your salt chlorinator system while replacing your old Pentair salt cell. The generic IC20 makes 1.1 lbs/day of chlorine. Guaranteed compatibility when replacing your original OEM Intellichlor salt chlorine generator, delivering improved chlorination capacity so your equipment can run less, use less energy, and last longer! Even better, the generic Pentair IntelliChlor replacement cell comes with an onboard digital controller that allows you to adjust chlorine output with a tap of a button, and displays the actual salinity in PPM! With this aftermarket replacement, you get more and pay less! Pentair Intelli-Chlor 20,000 Gallons. All IntellChlor 520556 Power Centers. The generic Pentair IC20 replacement salt cell is an affordable after-market option that can provide big savings over more expensive OEM Pentair IC-20 replacement cell. Plus it’s an easy drop-in replacement with guaranteed compatible connections for the Pentair IC-20. The cell meets or exceeds factory specs and includes power adapter cord (standard 14′) and unions compatible with the Intellichlor models. Note: The generic IntelliChlor cell does not utilize a RS-485 or data connection for integration with automation systems like Pentair Intellitouch, Pentair Easy Touch®, Jandy® AquaLink®, Hayward® AquaLogic® and Hayward ProLogic®. Please note this item is not affiliated with Pentair Plc. The use of such trademarks herein is for informational purposes only, and the product(s) are not those of Pentair Plc, but rather are simply compatible with the referenced Pentair product. This fit right in to the plumbing and plugged right in to my power supply box on the wall. This took 10 minutes, and I paid exactly half of what the pool company wanted – GOOD DEAL.. So far, so good. I have used the Pentair salt cells for the entire 11 years that I? Ve had a pool. The first one lasted 5 years but the last two only lasted 3 years, each. They are SO expensive so I decided to give the generic salt cell a try. Our pool was opened on May 3, 2021 and we are clear and producing free chlorine right now on May 13. The generic unit fit right into the housing for the Pentair. It was super easy to install & is working well. Ll try to remember to do a follow-up review in a few years. I hope that we can get 5 years out of the generic salt cell. This was one of the few alternatives that seem to be left for the smaller Intellichlor replacements which are not available anymore. I’m glad it exists! Set up was easy and it seems to be producing chlorine well. So far so good. Read all of the direxctions. Hookup was a direct replacement.. Controls were easy to understand and much better than my old one.. Took two weeks to stabilize pool to correct chlorine levels, but this may have been my fault since I never boosted the device to 100% chlorine generation. Easy to put in and operation is great, just wish they woul last more than 5 years. Not just this one but all salt generators have a short life no matter how clean you keep them. Will I need to do any work to put this in or need any tools? No, its basically plug and play. It connects to the pipes where the old one was with threaded connectors, and you hook it up to the power center with a cord just like your old one. Unfortunately the IC15 uses a different power supply than the rest of the intellichlor series. The IC20 cell is meant to plug into the more heavy duty intellichlor power supply that hangs on the wall. Will it work with the easy touch system. The cell cable has the same standard Pentair IntelliChlor cord connections to the power supply unit. These don’t communicate with external controllers or RS485 data connections, but this isn’t necessary for operation just for remote display/control. Can it replace ichlor30 on fittings side? M fine w 20k gallons. The ichlor30 is shorter in length. If by chance your ichlor was installed using the ichlor-to-intellichlor adapter kit, you could remove that kit and it would hook right up. If not, then you would just cut out the old cell and plumb in the new cell (it comes with new fittings). Then connect it to the power center on the wall. Will this unit work with the Intellicenter automation system from Pentair? Can the IC20 be mounted vertically since it appears the flow sensor is on the exit side of the flow? This cell can be mounted in either orientation just like the original. And are the plates in it serviceable? No Answers have been submitted yet to this Question. Will this work in place of the pentair iChlor 30(1.0). The ichlor30 works with the same power center was the Pentair Intellichlor, so this item would work with it as well. However, the ichlor30 cell is shorter in length than Intellichlor cells. That means you would need to replumb by cutting out the old cell and gluing in the new cell (it comes with new fittings). This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Other Pool Equipment & Parts”. The seller is “pacedon” and is located in this country: US. This item can be shipped to United States.

• Brand: Pentair
• MPN: CFICGEN20
• UPC: 646437729680