1.5/2.0 HP Self Primming Swimming Pool Pump for In/Above ground Pool with Strainer

1.5/2.0 HP Self Primming Swimming Pool Pump for In/Above ground Pool with Strainer


1.5 / 2.0 HP Powerful Self Primming Swimming Pool Pump with ON/OFF Switch for In/Above ground Pool w/ 1.25”&1.5&2.0” Union. About 1.5HP Swimming Pool Pump without Timer. ??????? -?????????????????????????????? : With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6360 GPH, lifting water flow up to 52.5 ft; Withstands water temperatures up to 122°F. ??????????????????????????????? : The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. ????????????????????????? , ?????????????????? : Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. ??????????????????????????????? : The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ??? /?????????????????????????????????????????????? : The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. ??????????????????????????????????? : Always fill the pump with water before turning it on; Check that the drain plug is tightly closed and refill until water overflows; Excess water will prime the system and protect internal parts. 1.5 in Connectors x 2. 2 in Connectors x 2. 1.25 -1.5 in Pipe Fittings x 2. Nozzle Internal Diameter:G1 1/2. Max Head:52.5 FT. Nozzle External Diameter:G2 1/4. Power Cord:35.8 in/0.91 m(American three-pin plug). PVC Glue Recommended:PVC Cement, Clear PVC Solvent Glue, Gray PVC Solvent Glue. Pipe Size:1.5/2.0 in. Package Weight: 29.3 lb. About 2.0HP Swimming Pool Pump. HIGH-PERFORMANCE PUMP: With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6950 GPH, lifting water flow up to 60.0 ft; Withstands water temperatures up to 122°F; The 2 HP 1500W DOE-certified motor is equipped with copper wire that can keep the pump efficient and extend its lifespan. DURABLE & UL CERTIFIED: The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. EFFICIENT WORK, FAST DRAIN: Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. EASY OPERATION: The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ON/OFF SWITCH FOR EASY CONTROL: The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. IMPORTANT NOTE: Never turn on the pump without first filling it with water to avoid damage to mechanical seals and impellers; It is very important to check if the pump is filled with water before turning it on; First, check if the drain plug off the pump is inserted, and if so, fill more water into it; The excess water will seep into the pipeline and help generate suction. Item Weight: 25.4 pounds. We do not have access to your full financial details. Leaving Feedback: We appreciate your feedback! Positive ratings help us grow our business. We serve clients worldwide with a focus on reliability, competitive pricing, and exceptional service. Your trust and partnership are valued, and we strive to enhance your experience through dedicated support and consistent performance. Thank you for being part of our story.

Be Sociable, Share!

Comments are closed.