The Intex Krystal Clear Sand Filter Pump & Saltwater System CG-26679EG, 110-120V with GFCI, 2650 PGH Pump Flow Rate, is an all-in-one unit that both cleans and sanitizes pool water. Sand Filters are the most efficient, desirable, and affordable methods of cleaning pool water. All-natural sand provides excellent water filtration, and with proper maintenance, can last up to five years. In combination with Salt Water System, which uses the same sanitation technology as many resorts, community, and in-ground pools, your pool water will be kept free of bacteria and algae for the ultimate swimming experience. The Intex Sand Filter & Saltwater System works best on Above Ground Pools that hold a minimum water capacity of 4,800 gallons and a maximum water capacity of 15,000 gallons. Intex Krystal Clear Sand Filter & Saltwater System Pump with GFCI, Model 26679EG, 2,650 GPH Pump Flow Rate. 0.6 HP motor. Pump flow rate: 2,650 GPH. 6-way control valve: filtration, backwash, rinse, circulation, drain and close system. Digital timer automatically turns pump on and off – can be set for 1 to 12 hour cycles. 25-foot power cord with GFCI. Two 1-1/2 inch connector hoses. Hydro Aeration inlet fitting helps improve water circulation and filtration water clarity, and increase negative ions at the water surface. , combined with natural chlorine, destroys organic contaminants such as bacteria and algae. Is so effective, the amount of natural chlorine needed and generated by the system is reduced by approximately 60%. Chlorine Output: 11 grams per hour. Easy to use control panel. 2 self-cleaning modes: 6-,10-, or 14 hour cycles. Automatic operation with 24-hour clock. Assembled Product Dimensions (L x W x H): 18.88 x 27.13 x 24.63 Inches.
