Tag Archives: motor

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements

NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements


NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements. Hayward 1/1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacements. UL Certification for motor, longer lasting than those without certification. C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for. High performance, energy saving motor with stainless steel shaft could stand wear and tear. High efficiency, low maintenance and reliability. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. 100% drip proof, heat-resistant double-sized seal for long motor life. Drain plug for easy maintenance of pump. Suggested Installation: 24″-26″ sand filter and above-ground pools. Horsepower: 1/1.5 HP. Flow: 5555GPH1HP/ 6500 GPH1.5HP. Temp: 104 Degree Fahrenheit (40 Degree Celsius). Power Cord: 58.8. 1x 1HP/1.5HP Dual voltage Swimming Pool Pump. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. The pump prevents the inlet from entering the water and burns the motor. There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. Welcome to my store. We will reply you ASAP. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. The item “NEW Hayward 1/1.5HP In-Ground Swimming Pump Motor Strainer Generic Replacements” is in sale since Tuesday, August 25, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “yunli1993″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Custom Bundle: No
  • Brand: Hongmotor
  • Type: Pool Pump
  • Model: Swimming Pool Pump
  • MPN: Does not apply
  • Pool Type: In Ground &Above Ground
  • Horsepower: 1/1.5HP
  • Speed: Single-Speed
  • Qmax: 350/410 L/min
  • Hmax: 11/15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske

2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske


Please fill the pump body with water before energizing. If the mechanical seal is operated in a dry condition, it will Damage to the mechanical seal and impeller causing water leakage. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. 2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo W/ Strainer Baske. Voltage:110V / 60Hz. Head:Max 19m / 62.34ft. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 10.2 kg / 22.5 lbs. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. Max 19m / 62.34ft. 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H). 10.2kgs / 22.5 lbs. B Damage caused by natural disasters, flood fire, lightning or pollution. C If item was opened, any parts removed or repaired by any unauthorized person. D If damaged parts are the TFT screen or the screen has less than 3 dead pixels. The item “2.5hp Pool Pump Motor Above Ground Swimming Pool Filter Hi-Flo With Strainer Baske” is in sale since Monday, October 5, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “9hk4872″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Type: SPP250E
  • Brand: Unbranded
  • UPC: Does not apply
  • Model: SPPE 250
  • Speed: 560 L/m
  • Horsepower: 1850W/2.5HP
  • Pool Type: SPP250E
  • Voltage: 110V / 60Hz
  • IP55 INS CL.: Max. 50 C
  • Amps: 6.8
  • Head: Max 19m / 62.34ft
  • Capacitor: 25 F
  • Inlet: 1.5” Internal
  • Outlet: 1.5” Internal
  • Noise Level: <65dB
  • Package Size: 600 x 205 x 350mm/ 24 x 8.07 x 14inch (L x W x H)
  • Weight: 10.2kgs / 22.5 lbs
  • MPN: Does not apply

1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115v Above GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground 1.5” pipe size. Powerful pump for above ground pools. High flow rate makes it more efficient and capable in pool cleaning. A see-thru cover with cam-lock lid quick inspect and tool-free service. The strainer basket with internal ribs assure flow when filled with leaves and debris. High-tech motor with qualified material provide with cooler running and longer life. 1.5 HP Above-Ground Pump also work with above Compatible with DE, sand, and cartridge filter Self-priming for Above-ground functionality Drain plug for easy winterizing. High durability with corrosion proof polymer. ETL Certificate, UL Certificate for motor. 1 x Pool pump. 1 x Power cord with US plug. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1.5HP 115V Above ground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Thursday, October 3, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • RPM: 3450
  • GPH: 5400
  • Type: POOL PUMP
  • Hmax: 49ft/15m
  • Voltage: 115v
  • Pipe size: 1.5”
  • Frequency: 60hz
  • Pool Type: Above-Ground
  • MPN: J11503
  • Amps: 15
  • Package size: 58x24x30.5cm/23×9.4×12 inch
  • Weight: 30lb
  • Plug type: US plug
  • Power cord length: 79”/2m
  • Brand: iMeshbean

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement



110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement. Always pay attention before use. Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged. When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Durable Corrosion -Stainless Steel 2.0 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability. The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety. Type: Swimming Pool Pump. Motor Shaft Material: Stainless Steel. Pump Housing Material: PPGF30 + PC (anti-Oxident). Rated Power: 1500W/2.0HP. Inner/Outer coupling: 1-1/2”NPT G2-1/4′. 1 x Water Pump. 2 x 1-1 / 2”NPT Inner coupling. 2 x 48.5mm Inner coupling(free gift). The item “110-240v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 14, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “mrl-7312″ and is located in Flanders, New Jersey. This item can be shipped to United States.

  • Brand: Unbranded
  • Type: Swimming Pool Water Pump
  • Voltage: 110-120V/220-240V 60Hz
  • Model: 2040700200M
  • MPN: 2040700200M
  • Custom Bundle: No
  • Modified Item: No
  • Style: Modern
  • Speed: Max Flowrate: 410L/min
  • Horsepower: 2hp
  • Pool Type: Above-Ground
  • Color: Black
  • Rated Power: 1500W/2.0HP
  • Max Flow Rate: 410L/min
  • UL Approval: Yes
  • Inner/Outer coupling: 1-1/2”NPT G2-1/4”
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Motor Shaft Material: Stainless Steel
  • Max Height: 12.5M

AO Smith Swimming Pool Motor UST1102 C-Face Round Flange 1 HP Brand New

AO Smith Swimming Pool Motor UST1102 C-Face Round Flange 1 HP Brand New



Pool Chemicals & Testing. Spa Chemicals & Sanitizers. Sign up to receive special insider notifications of deals, promotions, and new items! AO Smith Swimming Pool Motor UST1102 C-Face Round Flange 1 HP Brand New. Smith a name you can trust for pool replacement motors. 15.0/7.5 Max Amps. 1.10 Service Factor. Questions about this item? To make sure we get the order to you as fast as possible, orders are processed as soon as they come in. We cannot guarantee that any order can be cancelled once placed and processed. Included in this but not limited to are Heat Pumps, Gas Heaters, Large Filters, Slides, and Diving Boards. These products are delivered to the front of the driveway, not to the garage or installation site. The trucking company is not responsible to transport your items anywhere other than the front of your driveway. In this circumstance, we will call you with the additional charges. To help make this process as smooth as possible please follow these guidelines. Sign Bill of Lading (receiving bill). This document says that the order has been received. This all states that the order has arrived in good condition. It is the customer’s responsibility to inspect all packages received. This document also states the number of cartons you are receiving, please make sure this number is the same as the actual number of cartons received. It is your responsibility to make sure your order is in good condition upon receipt. Backyard Pool Superstore is here for all of your pool and backyard needs. Here at Backyard Pool Superstore, we understand that mistakes can be made. The packaging must be resealed with. See below for more details. When you sign for the product, you state the product arrived in good condition, and you accept the condition it was delivered in. Our staff is dedicated to making sure your experience with us is not only good, but the best! We are not just “Internet retailers”, we are pool and backyard professionals that have been in business for over 20 years. We pride ourselves on fast, professional customer service. We use the latest technology to assist you with your pool, spa, patio, and backyard needs. The Best Customer Service and Expert Advice. With many years of experience in all aspects of the pool and backyard industry, we are here to help you with all of your questions. If one of our staff members cannot help you immediately, we will not rest until we find an answer to your question. The item “AO Smith Swimming Pool Motor UST1102 C-Face Round Flange 1 HP Brand New” is in sale since Wednesday, March 30, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “backyardpoolsuperstore” and is located in Multiple Locations. This item can be shipped to United States.

  • Brand: A. O. Smith
  • MPN: UST1102
  • Horsepower: 1hp
  • Model: C-Face Round 1HP
  • Speed: Single-Speed

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement



This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “115V/230V 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Tuesday, July 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in Westbury, New York. This item can be shipped to United States.

  • Features: Easy Installation
  • Certification: UL Certification
  • MPN: YCBHBP
  • Qmax: 410 L/min
  • Item Width: 9.6″
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4″
  • Item Height: 11.4″
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Power Source: Corded
  • Material: ABS
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26lbs
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: FANSDEALONLINE
  • Warranty: 5 Years
  • Color: Black
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor

Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor


Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40 The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Inlet : 1.5 Internal. Outlet : 1.5 Internal. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. 1 x SPPE250 Swimming Pool Pump. 1 x User’s Manual. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor” is in sale since Saturday, November 21, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

  • Amper: 16A
  • Horsepower: 2.5HP
  • Speed: Single-Speed
  • Qmax: 560 L/min
  • Hmax: 21 Meter
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 5 Years
  • Type: Pool Pump
  • Brand: VIPSHOPMARKET
  • Manufacturer Warranty: 5 years
  • Power: 1850w
  • Suitable For: Above Ground Pools
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1850W/2.5HP
  • Color: Black
  • Voltage: 110 V

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground

1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground


For more information on our products. Please send message to us. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. What Customers Have To About Us. Delivered as promised and item is as described. Just what i was looking for. Had a problem-was able to successfully resolve it. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. 104 Degree Fahrenheit (40 Degree Celsius). 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and thats why our customers keep coming back. 25 years Industry Experience. The item “1.5HP Swimming Pool Pump Motor Hayward withStrainer Generic In/Above Ground” is in sale since Tuesday, January 19, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “ftpress” and is located in Westbury, New York. This item can be shipped to United States.

  • Model: 1.5HP
  • Amper: 10.8/5.4A
  • RPM: 3450/min
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • Item Height: 11.4″
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Item Width: 9.6″
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 9 Years
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 26lbs
  • Brand: FTPRESS
  • Material: ABS,PVC, Stainless Steel, Copper
  • Features: Easy Installation
  • Item Length: 22.4″
  • Suitable For: Above Ground Pools
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Voltage: 115-230V

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Ontario CA. This item can be shipped to United States.

  • Features: Easy Installation
  • Manufacturer Warranty: 5 years
  • Certification: UL Certification
  • MPN: 2040700300
  • Qmax: 410 L/min
  • Item Width: 9.6 in
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4 in
  • Item Height: 11.4 in
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Material: ABS,PVC, Stainless Steel, Copper
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Model: 1.5HP 110V-240V
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1100 W
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: HOMESUPPLIES
  • Warranty: 5 Years
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part

A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part


Tools & Home Improvement. Patio, Lawn & Garden. Beauty & Personal Care. Pro Audio & Sound. Car Audio & Electronics. Sign Up for Our. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part. This is a replacement motor that will replace Hayward Super Pumps or other pumps that have a “round or C Flange” bolt pattern. The UST1102 is compatible with Hayward Super, Super II, and Max Flow pumps, Jacuzzi Magnum pumps, and Pentair Pinnacle pumps. Century offers a comprehensive line of electric motors for commercial, industrial, and residential pump and general purpose applications. Century is a highly recognized brand in the leisure water industry for its breadth of product offering, quality and reliability. And, we have more new innovative designs on the way! Most original equipment pump manufacturers choose Century pump motors. UST1072 Replacement 1 HP motor for Hayward swimming pool and spa pumps. Replacement for Hayward Super Pumps, Pentair, Sta-Rite, and others with round or C-flange bolt pattern. Designed for in-gound swimming pools. Single speed, 1 HP design with 1.1 service factor. No load speed of 3,450 RPM. Features a 56J frame, 1081 design. Auto protector built in. Does not include a base. NEMA 56C face mount. Product type: Replacement part. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! The item “A. O. Smith UST1102 1 HP Hayward 56J Pool/Spa C-Flange Motor Replacement Part” is in sale since Tuesday, April 3, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vm-express” and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

  • Brand: A.O. Smith
  • MPN: UST1102
  • Custom Bundle: No
  • Type: Booster Pump
  • Material: Aluminum
  • Suitable For: In Ground Pools