Tag Archives: panels

SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels

Posted on July 29, 2023 by admin| Comments Off
SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels


Functional, but Missing key components. Piece of item torn off. Includes: (1) Solar Heating System, (3) Tubes Connectors, (3) Clamps, (1) Manual. PLEASE SEE PHOTOS FOR WHAT IS INCLUDED. Please do NOT ASSUME an item is included if it is not in the photo. Missing (1) Clamps, Missing (1) Tape, Missing (4) Caps. SEE NOTE SunHeater S421P Aboveground Pool Solar Heating System w 2 x 20ft Panels. Dollarhog has partnered with some of the Nation’s largest retailers and distributors to aggressively liquidate consumer merchandise. That philosophy inspired family-owned Dollarhog. We appreciate your business! All merchandise is tested prior to listing unless it is sealed in the factory package. This will include powering on the unit and checking all the major functions. You will find condition and testing notes in the item description. This helps our buyers know EXACTLY what they are getting. We check and respond to our messages often. We are here for you. We check these messages often throughout the day, 5 days a week, and it is our goal to respond as quickly as possible. Many carriers will not deliver to a PO Box and this can delay your order. (1) Solar Heating System. (3) Tubes Connectors. (3) Clamps. (1) Manual. Missing (1) Clamps. Missing (1) Tape. Missing (4) Caps. Per the CPSC, failure to adhere to applicable UL safety standards. May pose an unreasonable risk to consumers of fire and serious injury or death; and that compliance with the relevant UL standards significantly reduces the risk of injuries and deaths from micromobility device fires.

Comments Off

Posted in note

Tagged , , , , , , , , ,

Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty

Posted on November 7, 2022 by admin| Comments Off
Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panels Lifetime Limited Warranty


Industrial Grade Solar Pool Heater Panel. Our inventory supply is one of the largest and most diverse in the nation. We house many different sizes & brands – we are capable of custom building virtually ANY package you need! Manufactured using a patented over-molding process whereby the headers and riser tubes become one piece, making the collectors extremely durable. Certified to withstand strong wind, violent storms are no match for SwimJoy’s durable panels and mounting method. Strap-free mounting pad system minimizes penetration points, increases aesthetic appeal. Water escapes completely, preventing freezing and cracked tubes. Separated tube design is less susceptible to “pinhole” leaks from freeze damage. Systems do still need to be plumbed properly and drained (winterized) in cold weather climates. SwimJoy panels are less susceptible to freeze damaged riser tubes, however this does not mean they 100% freeze-proof. Each tube opens directly into the header increasing flow and eliminating back-pressure. Lower head pressure keeps pumping requirements to a minimum which helps maximize efficiency. Eliminates wear and tear on pool pumps. Panels float above the roof, allowing it to breath and stay clean and dry. Innovative panel mounting system minimizes roof connections. One-piece panel design and superior mounting system eliminates the need for rubber hoses and metal hose clamps that require regular maintenance and replacement. Wide Range of Panel Sizes. Panels are available in a multitude of sizes to fit any roof size and blend nicely with your home. We are capable of packaging any combination of panel sizes needed to fit ANY unique installation requirements you may have. Available sizes: 4′ X 6.5′, 4′ X 7.5′, 4′ X 9.5′, 4′ X 10.5′, 4′ X 12.5′, 1′ X 7.5′, 1′ X 10.5′, 1′ X 12.5. When it comes to residential pool heating, SwimJoy provides homeowners with one of the best solar options available today. SwimJoy’s specialized system is extremely durable, energy efficient, freeze resistant, virtually maintenance-free & designed to withstand extremely strong storm winds. A technologically advanced design makes SwimJoy one of the most efficient, maintenance-free solar pool heating systems on the market. An energy efficient design provides year-round pool heating in warm climates and extends the swim season in colder climates. Thanks to the reliability, efficiency, and durability of its state-of-the-art system, you can entertain, exercise, and create great memories, worry free. Strapless Flush Mounting to Any Roof Type! Specialized Mounting System Changes the Game. SwimJoy solar pool heaters feature a distinct, sleek design showcased by its specialized mounting pad system. Each panel contains a mounting rail molded directly into the manifold, allowing for a greater degree of flexibility with mounting hardware locations, especially useful for tile roof installations. Specialized mounting pads allow for strapless flush mounting to any roof type, minimize roof penetrations and allow for expansion and contraction. SwimJoy’s innovative mounting system withstands violent storm winds without the need of tie-down strap. Not only are strapless mounts much more aesthetically appealing, the elimination of strapping also minimizes the number of roof connections, making SwimJoy one of the most roof-friendly systems available. SwimJoy installations are completely strap free! An individual tube design allows roofs to breathe, preventing moisture buildup and virtually eliminating wind loads. Furthermore, each panel contains a mounting sled every twelve inches down the length of the panel. These sleds prevent panel distortion and riser tube abrasion over time while also adding strength to the unit. Maximum Efficiency + Longer Operating Life. Its All About Flow! SwimJoy features an open flow design with each and every individual tube opening directly into the header, increasing flow and virtually eliminating backpressure, saving wear and tear on your pool pump. An individual tube design allows riser tubes to expand and contract independently; eliminating cracks and leaks due to wear and tear from thermal expansion and contraction. Low head-loss riser tubes eliminate high head pressures, maximize efficiency, and protect against clogging. The round design also captures more heat. SwimJoy’s unique square header shape maximizes flow and increases efficiency. Headers and risers are molded together forming one solid piece, eliminating seams and welds that can crack with age and stress. This produces the strongest possible connection and ensures a low maintenance system. The Industries Best Method for Connecting Panels & Piping! Panel clamps also allow the panels to be mounted closer together for a more efficient and attractive system. A Global Leader in Solar Pool Heating System Design. Manufactured by Magen Eco Energy. SwimJoy is built and designed by Magen Eco Energy, one of the most renown solar pool heating manufacturers in the world. Magen provides both residential and commercial solar solutions to countless swimming pools across the globe. Industry Leading Product Protection. Many options exist for heating your swimming pool either with or without solar. SwimJoy provides homeowners with a solution they can rely on without needing to compromise in one category to achieve another. SwimJoy won’t heat your pool at night or during harsh winter conditions, however it will provide among the highest quality results in the industry with one of the world’s most trusted names behind it. You really can rest assured with SwimJoy. NSF-50: Ensures the safety and performance of its products when used for public schools, spas, and recreational water facilities. ISO 9001: Quality Management Standards. ISO 14001: Environmental protection by the International Organization for Standardization. SRCC OG-400: The most current standard; this certification is a mark of quality, safety, durability and proper integration with pool designs and plumbing systems. (1) SwimJoy Solar Pool Heater Panel. Please verify you have selected the correct size before processing your order. WHAT SIZE SYSTEM DO I NEED? Step 1 – Overview. A few different variables should be considered when selecting a solar pool heating system to match your swimming pool. The primary factors are; your location (climate), pool size (surface area), and heating goals (how long your looking to extend your swimming season). Understanding exactly what your goals are will help determine how many panels you need and which system to ultimately select. Solar pool heaters are available in a couple different types, each with its own advantages and “ideal fit”. Because solar pool heating systems are dependent on weather and sunlight, these figures can only be used as an estimation, they cannot be guaranteed. Step 2 – Measure Your Swimming Pool. Solar pool heating systems are sized based on the. Of your swimming pool, rather than its volume. This is because the primary source of heat loss occurs through evaporation at the surface. If you have a geometrically shaped pool, this calculation is quite easy. If however, your swimming pool is a “freeform” shape, or a “kidney” shape, this calculation can be a bit more difficult. For pools matching this second classification, see our step-by-step instructions for using Google Maps to measure your pool (Step 2B). Formulas for Geometrically Shaped Pools. Pr² (radius being half the diameter of your pool, p=3.14). L x W (length x width). Step 3 – Calculate Solar Coverage, “Offset”. Generally speaking, solar pool heating systems are sized anywhere between 50%-100% of a swimming pools total surface area. IE: “50% offset” means you are matching 50% of your pool’s surface area to the total surface area of all your solar panels. If your pool has a total surface area of 400 square feet, 50% offset means you will need a total of 200 square feet of solar panels to heat it. As a reference; a single 4′x12.5′ solar panel has a surface area of 50 square feet, so a system with (4) 4′x12.5′ solar panels has a total surface area of 200 square feet. 3-4 Month Swimming Season. If you are only looking to add some additional heating during the summer months (3-4 months of warm swimming pool temperatures), 50% offset should be sufficient. 4-6 Month Swimming Season. If you are looking to heat your pool into the shoulder months (4-6 month swimming season), you will want to aim in the 60-80% range. 8-10 Month Swimming Season. If you are looking for a full spring-fall season extension (8-10 month swimming season), you will want to aim for 85%-100% offset. Step 4 – Climate Considerations. When it comes to location (climate), you will want to consider how cold/long your winter months are. Solar systems only work when the sun is out and shinning, they also need to be winterized (drained & isolated) for the winter months when temperatures drop below 42 degrees. They also need to be isolated when pools are shut down for the winter. For this reason, not all climate zones are capable of achieving a full spring through fall season extension. If you live in one of these colder climates, you will not be able to run your solar heater during these cold months when temperatures drop near freezing or below. If you are only able to keep your system running for 4-6 months a year, 50%-80% offset will be more than sufficient. Step 5 – Optimizing Efficiency. Other factors to consider are what direction the panels will be facing, how they are plumbed, and the amount of sun exposure each day. Solar pool heating systems will perform at optimal performance when the system is facing south, plumbed in parallel (if possible; to achieve a higher flow rate), and the system has full exposure during the day. If the panels are installed on a ground structure (ground rack), you will want a solid substrate beneath the panels to keep any wind from passing through the riser tubes (reduces wind load on the panels & restricts heat loss). Also, be sure the system is never installed at a pitch greater than 45 degrees (the angle the sunlight hits the panels does make a difference; efficiency nearly drops off the map once the pitch exceeds this maximum). Step 2B – Measuring Your Pool w/ Google Maps. How to Size Your Swimming Pool with Google Maps. Go to Google Maps. Type your address into the search bar and hit enter. Zoom into your address with either the mouse wheel or the (+/-) buttons located in the lower right-hand corner. To Edit Your Selection. You can move a selected point by clicking on the node, holding the mouse button, and moving it to the desired location. You can also erase and start over by right clicking anywhere on the screen and hitting “clear measurement”. This is the surface area that will be used to calculate what size system you need. Google Maps Example Pool Measurement. This tool also works well for measuring available roof space. (Satellite imaging provides pretty accurate measurements; however, they are not always 100% accurate and roof measurements should always be double checked by hand if possible). Our mission is to provide an outstanding customer experience from start to finish. Our team of dedicated experts are available to assist with any questions you have, at any point in your project. We offer design & consultation services free of charge, simply give us a call or send us a message. Our primary objective is to help you identify the best possible solar solution that will achieve your heating goals, while also providing the best possible fit to your roof type and climate. Here is a list of a few of the items we provide to our customers on a daily basis. Advanced design and layout services. Want to make sure your system is optimized for your climate, roof & heating goals? Plumbing design & tie-in assistance. Design & performance optimization. Pump sizing & speed considerations. Metal roofs, tile roofs, pergolas, ext. Achieving proper automatic gravity drainage. Winterizing systems in cold weather climates. Automation units, heat pumps, ext. At Solar Pool Supply, we are constantly seeking new and inventive ways of pioneering previously untouched challenges in the solar pool heating industry. We began with a renovation of the DIY market by custom packaging the industries leading brands into complete “do it yourself” kits for inground swimming pools. Systems of this caliber had previously only been available to select areas of the country by a professional installer. We have come a long way and have succeeded in making it possible for a homeowner anywhere in the world to have access to these very same systems, all without the need of a contract! What Hardware Do I Need? The items listed below are generally required if you are installing a full solar pool heating system (new or replacement system). If you are simply replacing a couple old/damaged panels within an existing array, see “Repair & Replacement Components”. Contains the parts necessary for installing a SwimJoy solar pool panel to a supporting surface and making water connections from one panel to another. One (1) panel kit is required for each solar panel in the array. Each SwimJoy Panel Kit contains. (2) Mounting Pad, Top Header. (2) Mounting Pad, Bottom Header. (2) PPC, Panel Clamp Assembly. Row Kit: Contains the parts necessary for making water connections from a row of solar pool heating panels to the systems supply and return plumbing lines. One (1) row kit is required for each row (bank) of solar pool heating panels in the array. If you are installing your panels in multiple rows, you will need one row kit per row of panels. Each Row Kit contains. (2) Pipe Connector, CPVC. Vacuum Relief Valve Attachment Set. Contains the parts necessary to aid in gravity drainage of the panels and piping. One (1) set is required for each system. Each Vacuum Relief Valve Attachment Set contains. (1) Vacuum Relief Valve, 3/4 MPT. (1) Reducer Bushing, Spigot X FPT, 2″ X 0.75″. (1) PVC Pipe Fitting, Tee, Slip X Slip X Slip, White, 2. The items listed below may be needed in addition to the items above if you are installing a new system from scratch (do not have a pre-existing solar pool heater), OR have specific installation requirements due to available roof spacing i. E: if you need to split the panels into multiple rows or need to bypass an obstruction like a roof or skylight. We also have supplemental high-wind add-on kits available for those living in. High-wind/storm climates and need additional mounting security. Manual Temperature Control Plumbing Kit. Contains the valve’s necessary for manual temperature control of your solar pool heating system. A 3-port diverter valve is manually adjusted to turn solar on and off. Two isolation valves are used to completely shut off solar for maintenance and winterization (prevents water from entering the solar panels). The check valve is used to prevent water from flowing backwards through your pump & filter. Includes premium Pentair lube-free valve’s, 2? E ach manual temperature control plumbing kit contains. (1) Pentair 3-Port Solar Valve w/ Drain Down, CPVC, 2? (1) Pentair 2-Port Check Valve, CPVC, 2? (2) Pentair 2-Port Isolation Valve, Positive Seal, CPVC, 2? High-Wind Add-On Panel Kit. Recommended for installation sites with frequent high-wind or storm weather conditions. Supplemental high-wind panel kits are used in conjunction with standard panel kits to provide the parts necessary to secure each of SwimJoy’s 8 mounting rails (4-top & 4-bottom) to the installation surface. Features extra-wide top header mounting pads and additional bottom mounting pads for maximum security. One (1) high-wind add-on panel kit is required for each solar panel in the array. Each High-Wind Add-On Panel Kit contains. (4) Extra-Wide Top Mounting Pads. (2) Bottom Mounting Pads. Row Spacer Kit: Contains the parts necessary to bypass mounting surface obstructions larger than 6 such as roof vents, skylights and exhaust fans. Allows the connection of PVC pipe between the panels to provide proper clearance of the obstruction. One (1) Row Spacer Kit is required for each split in a row of solar panels. Each Row Spacer Kit contains. (4) Pipe Connector, CPVC. PVC Pipe Support Bracket. Optional component used for supporting feed and return line PVC piping on the roof or other mounting surfaces. Each bracket includes a specialized wedge attachment that allows for the natural expansion and contraction of the pipe as it heats up and cools down. Includes flashing base to support lag bolt attachment to the mounting surface and provide enhanced seal. Also used to create a low-profile, aesthetically pleasing installation. REPAIR & REPLACEMENT COMPONENTS. The items listed below are used if you are replacing old/damaged panels within an existing array, or need to repair damaged or leaking solar panels or hardware components. Patented panel clamp connection design eliminates the need for traditional rubber hose connections that deteriorate over time, requiring regular maintenance and replacement. This low-profile connection style also drastically improves the aesthetics of installations; producing a cleaner, more attractive system. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Makes header-to-header panel connections without any gap. (panels connect directly next to each other). Used to make attachments with end caps & pipe connectors. Used to attach PVC Pipe to the solar pool heating system. This is generally done at the supply and return connection points, however it can also be done to space out panels around larger roof obstructions (see row spacer kit). Pipe connectors attach the header of a solar panel (via panel clamp assembly) to either a PVC coupling, or directly to PVC pipe (depending on pipe size). 2 SCH40 PVC Pipe connects with a PVC coupling. 1.5 SCH40 PVC Pipe is slip fit directly into pipe connector. Used to cap off the end of a solar pool heating system array (bank/row of panels). For most applications, one (1) is used on the end opposite the supply connection, and one (1) is used on the end opposite the return connection. Attaches to the panel header via panel clamp assembly. Allows air to enter the solar pool heating system when the pool pump shuts off to facilitate automatic gravity drainage of the panels and pipe. This is an extremely important aspect of solar pool heating systems to prevent freeze damage, as well as keep air from stagnating within the panels and piping. Allows for automatic gravity drainage of the panels and piping system must be installed in a manner which allows for this functionality. Prevents freeze damage and keeps air from stagnating. Prevents damage to the solar pool heating system by allowing air to enter the system when the pump shuts off, preventing the formation of a vacuum. Solar Panel Repair Tool Kit. Includes all the necessary tools and plugs to repair SwimJoy solar pool heater panels with damaged riser tubes. Maintains the uniform appearance of the panel. Includes chisel, plug insertion tool. & 12 repair plugs. (2) plugs are required for each riser tube repair; (1) at the top & (1) at the bottom. Replacement plug pack, used to repair SwimJoy solar pool heater panels with damaged riser tubes. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “solarpoolsupply” and is located in this country: US. This item can be shipped to United States.

  • Panel Size: 4′x12.5′
  • Header Width: 48.41”
  • Burst Pressure: 270 psi
  • Warranty: 12-Year Limited + Bonus Lifetime Limited
  • Power Source: Solar
  • MPN: SJ
  • Suitable For: Above Ground Pools, In Ground Pools
  • Panel Dry Weight: 16 – 24 Lbs. / Panel
  • Brand: SwimJoy
  • Type: Solar Pool Heater Panel
  • Panel Volume Capacity: 2.4 – 3.7 Gallons / Panel
  • Product Type: Solar Pool Heating System DIY Kit
  • Working Pressure: 90 psi
  • Manufacturer: Magen eco-Energy
  • Panel Type: Separated Tube Design
  • Manifold Diameter: 2” O.D.
  • Country/Region of Manufacture: Israel

Comments Off

Posted in industrial

Tagged , , , , , , , ,

FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4′ X 10

Posted on March 13, 2022 by admin| Comments Off
FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4' X 10


FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4' X 10


FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4' X 10


FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4' X 10


FAFCO Solar Panels 4X10 SunSaver Solar Pool Heater Panel 4' X 10


SunSaver Solar Pool Heater Panel. Our inventory supply is one of the largest and most diverse in the nation. We house many different sizes & brands – we are capable of custom building virtually ANY package you need! FAFCO® has been designing and manufacturing solar thermal products in the United States for 50 years. Through advancements in water distribution, flow, and heat transfer, FAFCO®’s patented design technology has delivered solar pool heating collectors with the highest rated heating performance in the solar industry. The FAFCO® SunSaverT panel is manufactured in Chico, California. The panel is a specially developed parallel, circular channel design manufactured from a highly stabilized polyolefin material. Get The Most Out of Your Swimming Pool! FAFCO® solar pool heating dramatically extends your swimming season, enabling healthy enjoyment and exercise in luxurious warm water from spring to fall. First-time pool owners are frequently surprised by how much traditional pool heaters cost to run. Because of this, many choose not to heat the pool at all, limiting its use to only the hottest days of summer. A FAFCO® solar pool heating system can cost less to install than a gas heater and it instantly adds value to your home and from then on, your heat is free from the sun. FAFCO® Solar Pool Heaters Simply Work. The premium quality, superior technology, and second-to-none performance of FAFCO® solar collectors lead the pack with the industries hottest performing panels. Solar is the most economically attractive option for heating your pool and extending your swim season. Compared to systems that run on electricity, fuel oil or propane, FAFCO® systems feature. The shortest payback period and highest return on investment. The lowest operational costs due to free solar energy. The longest lifespan, thanks to the components that neither move nor corrode. The lowest maintenance costs-minimal, if any. The cleanest, safest and quietest source of energy. FAFCO®’s High Performance Solar Pool Heater. SunSaverT is the high-performance solar pool heating system that can heat your pool far beyond the few warm pool days of summer. Just as important, you won’t have to pay a dime in pool heating bills. Enjoy free heat from the sun and months more swimming fun with the oldest name in solar pool heating – FAFCO®. Heat your pool to a warm, comfortable temperature with environment-friendly energy, free from the sun. Extend your swim season with luxuriously warm water. Dramatically reduce or eliminate pool heating costs. Add value to your pool and to your home. Perfect for heating either in-ground or above ground swimming pools. May be either roof mounted or ground mounted. Connects to existing pool equipment and filtration system. Contains a larger 2-inch full-flow header pipe, preventing undue strain on your pool pump and increases overall efficiency. Patented performance innovations exclusive to FAFCO® solar collectors. Exclusive to FAFCO® Pool Solar Panels. Patented Water-Flow Metering System. The most efficient metering system in the industry. A design exclusive to FAFCO® solar collectors. Consists of an added “flow chamber” and “flow metering holes” between the header pipe and each individual collector tube. This patented metering system eliminates hot and cold spots in each of the panels, and produces even water distribution throughout the entire system, ensuring maximum heating efficiency and optimum water pressure throughout the entire group of collectors. Patented Fully-Wetted Surface Design. SunSaverT solar panels features nearly twice as many tubes per panel as compared to competitors. Additional tubes means more water is heated by the sun, transferring virtually all available energy directly to the pool water. (1) FAFCO SunSaver Solar Pool Heater Panel (4′ X 10′). Please verify you have selected the correct size before processing your order. WHAT SIZE SYSTEM DO I NEED? Step 1 – Overview. A few different variables should be considered when selecting a solar pool heating system to match your swimming pool. The primary factors are; your location (climate), pool size (surface area), and heating goals (how long your looking to extend your swimming season). Understanding exactly what your goals are will help determine how many panels you need and which system to ultimately select. Solar pool heaters are available in a couple different types, each with its own advantages and “ideal fit”. Because solar pool heating systems are dependent on weather and sunlight, these figures can only be used as an estimation, they cannot be guaranteed. Step 2 – Measure Your Swimming Pool. Solar pool heating systems are sized based on the. Of your swimming pool, rather than its volume. This is because the primary source of heat loss occurs through evaporation at the surface. If you have a geometrically shaped pool, this calculation is quite easy. If however, your swimming pool is a “freeform” shape, or a “kidney” shape, this calculation can be a bit more difficult. For pools matching this second classification, see our step-by-step instructions for using Google Maps to measure your pool (Step 2B). Formulas for Geometrically Shaped Pools. Pr² (radius being half the diameter of your pool, p=3.14). L x W (length x width). Step 3 – Calculate Solar Coverage, “Offset”. Generally speaking, solar pool heating systems are sized anywhere between 50%-100% of a swimming pools total surface area. IE: “50% offset” means you are matching 50% of your pool’s surface area to the total surface area of all your solar panels. If your pool has a total surface area of 400 square feet, 50% offset means you will need a total of 200 square feet of solar panels to heat it. As a reference; a single 4′x12.5′ solar panel has a surface area of 50 square feet, so a system with (4) 4′x12.5′ solar panels has a total surface area of 200 square feet. 3-4 Month Swimming Season. If you are only looking to add some additional heating during the summer months (3-4 months of warm swimming pool temperatures), 50% offset should be sufficient. 4-6 Month Swimming Season. If you are looking to heat your pool into the shoulder months (4-6 month swimming season), you will want to aim in the 60-80% range. 8-10 Month Swimming Season. If you are looking for a full spring-fall season extension (8-10 month swimming season), you will want to aim for 85%-100% offset. Step 4 – Climate Considerations. When it comes to location (climate), you will want to consider how cold/long your winter months are. Solar systems only work when the sun is out and shinning, they also need to be winterized (drained & isolated) for the winter months when temperatures drop below 42 degrees. They also need to be isolated when pools are shut down for the winter. For this reason, not all climate zones are capable of achieving a full spring through fall season extension. If you live in one of these colder climates, you will not be able to run your solar heater during these cold months when temperatures drop near freezing or below. If you are only able to keep your system running for 4-6 months a year, 50%-80% offset will be more than sufficient. Step 5 – Optimizing Efficiency. Other factors to consider are what direction the panels will be facing, how they are plumbed, and the amount of sun exposure each day. Solar pool heating systems will perform at optimal performance when the system is facing south, plumbed in parallel (if possible; to achieve a higher flow rate), and the system has full exposure during the day. If the panels are installed on a ground structure (ground rack), you will want a solid substrate beneath the panels to keep any wind from passing through the riser tubes (reduces wind load on the panels & restricts heat loss). Also, be sure the system is never installed at a pitch greater than 45 degrees (the angle the sunlight hits the panels does make a difference; efficiency nearly drops off the map once the pitch exceeds this maximum). Step 2B – Measuring Your Pool w/ Google Maps. How to Size Your Swimming Pool with Google Maps. Go to Google Maps. Type your address into the search bar and hit enter. Zoom into your address with either the mouse wheel or the (+/-) buttons located in the lower right-hand corner. To Edit Your Selection. You can move a selected point by clicking on the node, holding the mouse button, and moving it to the desired location. You can also erase and start over by right clicking anywhere on the screen and hitting “clear measurement”. This is the surface area that will be used to calculate what size system you need. Google Maps Example Pool Measurement. This tool also works well for measuring available roof space. (Satellite imaging provides pretty accurate measurements; however, they are not always 100% accurate and roof measurements should always be double checked by hand if possible). Our mission is to provide an outstanding customer experience from start to finish. Our staff of dedicated experts provide advanced design and layout services to make your DIY install hassle-free. Our main objective is to provide the best performing system for your unique requirements and needs, and save you thousands in the process. We offer a full selection of the industries leading brands, each providing a perfect fit for virtually any climate, roof style or installation requirement. We are here to help, providing industry leading customer service and support every step of the way. We pride ourselves on maintaining one of the most knowledge staffs in the industry and are here to assist with any questions you have. Here is a list of a few of the items we provide to our customers on a daily basis. Advanced design and layout services. Want to make sure your system is optimized for your climate, roof & heating goals? Plumbing design & tie-in assistance. Design & performance optimization. Pump sizing & speed considerations. Metal roofs, tile roofs, pergolas, ext. Achieving proper automatic gravity drainage. Winterizing systems in cold weather climates. Automation units, heat pumps, ext. ANYTHING YOU NEED, we are here to make your DIY installation HASSLE-FREE! Here at Solar Pool Supply, we are constantly seeking new and inventive ways of pioneering previously untouched challenges in the solar pool heating industry. We began with a renovation of the DIY market by custom packaging the industries leading brands into complete “do it yourself” kits for inground swimming pools. Systems of this caliber had previously only been available to select areas of the country by a professional installer. We have come a long way and have succeeded in making it possible for a homeowner anywhere in the world to have access to these very same systems, all without the need of a contract! You Might Also Like. The items listed below are generally required if you are installing a full solar pool heating system (new or replacement system). If you are simply replacing a couple old/damaged panels within an existing array, see “Repair & Replacement Components”. Contains the parts necessary for installing a solar pool panel to a supporting surface and making water connections from one panel to another. One (1) Panel Pack is included for each solar panel. Each Panel Pack Contains. (4) Hose Clamp, ST/ST, #40. (2) Rubber Coupling, Short, 3 1/2? (5) Dacron Strap, Cut, 65? (1) Dacron Strap, Cut, 32? (7) Tie Down Cap. (7) Tie Down Base. Bank Pack: Contains the parts necessary for making water connections from a row of solar pool heating panels to the systems supply and return plumbing lines. Also contains the parts necessary to aid in gravity drainage of the panels and piping. One (1) Bank Pack is included for each system. Each Bank Pack Contains. (6) Hose Clamp, ST/ST, #40. (2) Rubber Coupling, Long, 5? (1) Rubber Coupling, Short, 3 1/2? (1) Vacuum Relief Valve, CPVC. (1) Plug, CPVC, Machined. (2) Adapter, Female, CPVC. (1) Bank Pack Instructions. The items listed below will be needed in addition to the items provided in this DIY kit. You are installing a new system from scratch (do not have a pre-existing solar pool heater). Manual Temperature Control Plumbing Kit. Contains the valve’s necessary for manual temperature control of your solar pool heating system. A 3-port diverter valve is manually adjusted to turn solar on and off. Two isolation valves are used to completely shut off solar for maintenance and winterization (prevents water from entering the solar panels). The check valve is used to prevent water from flowing backwards through your pump & filter. Includes premium Pentair lube-free valve’s, 2? E ach manual temperature control plumbing kit contains. (1) Pentair 3-Port Solar Valve w/ Drain Down, CPVC, 2? (1) Pentair 2-Port Check Valve, CPVC, 2? (2) Pentair 2-Port Isolation Valve, Positive Seal, CPVC, 2? PVC Pipe Support Bracket. Optional component used for supporting feed and return line PVC piping on the roof or other mounting surfaces. Each bracket includes a specialized wedge attachment that allows for the natural expansion and contraction of the pipe as it heats up and cools down. Includes flashing base to support lag bolt attachment to the mounting surface and provide enhanced seal. Also used to create a low-profile, aesthetically pleasing installation. REPAIR & REPLACEMENT COMPONENTS. The items listed below are used if you are replacing old/damaged panels within an existing array, or need to repair damaged or leaking solar panels. Only hoses made specifically for pool solar applications should be used for connecting solar pool panels or any necessary hardware. Rubber coupling hoses not designed for this purpose may balloon and explode under the high operating pressure of a solar pool heating system. Molded EPDM rubber hoses designed specifically for use with solar pool heater panels. Used to connect solar panels to one another, attach end caps and vacuum relief valves. Durable UV-resistant EPDM rubber for long life in direct sun. Reinforced center prevents deformation from pressure and vacuum. Hose-clamp indicator ridges for perfect placement and seal. This replacement hardware pack features premium UV-Resistant Molded EPDM Rubber Hoses and Stainless-Steel Hose Clamps. These parts are designed specifically for use with solar pool heating systems that connect with rubber hoses and metal hose clamps. We offer both 1.5″ ID and 2″ ID header sizes. Hose connectors are used to connect solar panels to one another, attach end caps & vacuum relief valves. Each Connector Pack contains. (4) Panel Connector Hose, 3-3/4. (8) Hose Clamp, Stainless-Steel. Solar Panel Repair Kit (Original, 0.25 Diameter). Includes all the necessary tools and plugs to repair solar pool heater panels with leaks in the riser tubes. FAFCO solar panels require 0.25 diameter plugs. Includes cutter tool, blade, insertion tool. 0.05 Hex Ball End Driver, & 20 repair plugs. (4) plugs are recommended per riser tube repair; (2) at the top & (2) at the bottom. Will not repair leaks at the weld where the riser tube meets the header. 20-Pack Repair Plugs (Original, 0.25 Diameter). Replacement plug pack, used to repair solar panels with leaks in the riser tubes. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “solarpoolsupply” and is located in this country: US. This item can be shipped to United States.

  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Power Source: Solar
  • Type: Solar Pool Heater Panel
  • Manufacturer: FAFCO
  • Panel Size: 4′ x 10′
  • Modified Item: No
  • Warranty Guarantee: 12 Year
  • Header Size: 2\
  • Regular Price: $556.00
  • Brand: FAFCO
  • Suitable For: Above Ground Pools, In Ground Pools
  • UPC: 603570008201

Comments Off

Posted in fafco

Tagged , , , , , , ,

Heliocol Solar Panels World’s Best Selling Pool Heater Panel 4′ x 10.5

Posted on September 27, 2021 by admin| Comments Off
Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Heliocol Solar Panels World's Best Selling Pool Heater Panel 4' x 10.5


Panel Size: 4 x 10.5. This listing is for one single replacement Heliocol HC-40 collector panel only; it doesn’t include any plumbing or mounting hardware. If you need a complete solar pool heating system please check out our DIY Heliocol Solar Pool Heater System Kits. Please verify you have selected the correct size before processing your order. The item “Heliocol Solar Panels World’s Best Selling Pool Heater Panel 4′ x 10.5″ is in sale since Monday, August 26, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “solarpoolsupply” and is located in El Cajon, California. This item can be shipped to United States.

  • Country/Region of Manufacture: Israel
  • Custom Bundle: No
  • Power Source: Solar
  • Type: Solar Panel
  • MPN: HC-40
  • Panel Size: 4′ x 10.5′
  • Modified Item: No
  • Warranty Guarantee: 12 Year Limited Warranty
  • Header Size: 2″
  • Brand: Heliocol

Comments Off

Posted in heliocol

Tagged , , , , , , , ,

4×20 Swimming Pool Solar Heating Panel – Made IN USA 2019 (2-2×20 panels)

Posted on December 30, 2019 by admin| Comments Off
4x20 Swimming Pool Solar Heating Panel - Made IN USA 2019 (2-2x20 panels)


4x20 Swimming Pool Solar Heating Panel - Made IN USA 2019 (2-2x20 panels)


SUNGRABBER ABOVE GROUND or INGROUND. HEATING PANELS 2–2′ X 20. HI_FLOW DESIGN —– MADE IN THE USA. 2′X20′ SOLAR PANELS HI-FLOW. PANELS MOUNT LONGWAYS BESIDE A SWIMMING POOL or FOR ROOF MOUNTING. THIS IS A 80 , 000 + BTU SWIMMING POOL SOLAR HEATING PANEL. FREE HEAT FOR SWIMMING POOLS. SunGrabber ABG” OR IGP” Solar Pool Heater Panels. EACH BOX CONTAINS 2 PANELS (2′X20′) , end caps, & coupling, clamps. Two hoses (1 1/2) are required to hook up to an above ground pool. SYSTEM KIT & ROOF KITS REQUIRED FOR MULTIPLE PANELS ON ROOF MOUNTS. SUNGRABBER PANELS OTHER BRANDS? YRS IN BUSINESS OVER 40 YEARS IN SOLAR NEW TO INDUSTRY? UV INHIBITORS UP TO 5 TIMES MORE SOME INHIBITORS. PAID BY SUNGRABBER CUSTOMER PAYS. 200 100 OR LESS. BTU RATINGs 1000+ BTU sq ft??? THANKS FOR CONSIDERING SUNGRABBER SOLAR PANELS AND SUNGRABSOLAR. Manufactured by FAFCO in Chico California USA. SunGrabber ABG PANELS have been designed to heat your SWIMMING POOL with the best solar technology in the industry. Benefits of Solar Pool Heating. Solar energy uses the sun’s rays to produce heat or electricity. SunGrabber’s technology uses the sun’s natural energy in a cost-effective way to warm the water in your pool. Heats your pool to a warm, comfortable temperature. Is environment-friendly energy – free from the sun. Doubles your swim season with luxuriously warm water. Dramatically reduces or eliminates pool heating costs. Adds value to your pool and to your home. The bottom line is SunGrabber pool heaters use natural solar energy in an easy, safe, and cost-effective way. Increases your pool water temperature up to 10 degrees. Most efficient solar panel in the industry – producing over 80,000 BTUs a day. Compatible with your existing pool pump. Better than a gas heater – no gas line, no gas bills, no pollution. Made in the USA with quality you can count on. Start swimming in warm water today with our Easy Do-it-Yourself Installation. The item “4×20 Swimming Pool Solar Heating Panel – Made IN USA 2019 (2-2×20 panels)” is in sale since Monday, May 17, 2010. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “sungrabsolar” and is located in Junction City, Oregon. This item can be shipped to United States, Canada.

  • Model: 20′
  • Country/Region of Manufacture: United States
  • Material: patented polymer
  • Power Source: Solar
  • MPN: 260-7
  • Brand: Sungrabber
  • Product Type: Heaters & Heating Systems

Comments Off

Posted in 4x20

Tagged , , , , , , , ,

110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery

Posted on May 8, 2019 by admin| Comments Off
110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery


110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery



Tempered Glass Solar Panel. Flexible Foldable Solar Panel. World-class quality START WITH DOKIO. Use it for your RV when camping, or during beach trips with the family, either way. It’s renewable energy that’s completely portable and so easy to use. DOKIO products are made by A grade raw materials, and all model have pass through TUV CE ISO Certification! 25-year Linear Performance Guarantee. DOKIO guarantees, over 25 years, that the modules performance. Will not decrease by more than 0.7% per year a distinct added value. Compared to the two-tiered guarantees usual in the industry. For more product introduction, syestem set up method and troubleshooting information, please check our Video Tips page. We offer complete residential and commercial solar kits for both on-grid and off-grid applications, including inverters, railing, and other system components. If you’re looking for a convenient and portable power solution, the. DOKIO 110W Solar Suitcase. Is a perfect choice! More power with the same portability! Uses our premium Eclipse panels to give you the most efficiency when charging your portable appliances. Featuring the same cells as our very popular 200W Solar Panel, you will have the highest efficiency DOKIO has to offer! This solar panel maximum packs. Of power under ideal laboratory condition which is only 0.2 inch thick and weighs only 3.1KG. Making it easier to transport, hang, and remove. E panel is well protected in a thick fabric pocket sewn. A practical carrying handle is available easy to carry and use and with, Ideal to use for ca. Hiking, picnic, charging your car battery, or in emergencies. With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is s. Maller than a traditio nal model. M aximizes system output by reducing mis. Match loss; 100% EL testing on all DOKIO solar modules, guaranteed no hot spots. FREE INVERTER SOLAR CONTROLLER for you (save 40 dollars). Just throw away your heavy battery, this controller can use without battery, one Dokio solar panel and. One Dokio new inverter controller meet everything. All items that have been re. Turned by a customer. There may be scratches on the surface as well as rust, bent corners, or other cosmetic damage to the frames, but this will not affect the performance of the products. All products listed have been thoroughly tested before being repackaged. Pictures may vary from the actual products received. Open box items might not come with the original packaging. DOKIO 110W Foldable Solar Suitcase. Maximum Power(Pmax):110W. Short-Circuit Current (Isc):6.35A. Maximum Power Voltage(Vmp):18.00V. Maximum System Voltage: DC1000V. Maximum Power Current (Imp):6.1A. Nominal Operating Cell Temp. (NOCT):-45 to 80. Open-Circuit Voltage (Voc): 22.5V. Weight: 3.1 kg. Dimensions: 710 x5302 x 5mm. Accessories:Cable, Solar Panel, Controller. Minor reduction in efficiency under partial load conditions at 25°C: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved. If you there is any problem please send us a message and our Customer Service team will be happy to assist you. Please note that we won’t b. E able to process any order. With PO Box address for any size of solar panel. If your order arrives with app. If you later discover. Anything outside of this policy requires special authorization. High Performance & Versatile Application Anywhere. It can be curved to a maximum 30 degree arc, which makes it ideal for storage in tight spaces or crowded areas. This solar panel packs 100W of power. But it only weighs a mere 4.7lbs, making it easier to transport, hang and install. Short circuit and surge protection technology keep. You and your devices safe. It is not recommended to connect the solar panels in parallel, because it will cause over-current which may damage the product and the battery. It is not recomm. Ended to use more than 8 solar panels in series connection. Once the voltage exceeds 40V, an extra controller will be needed to protect the device being charged. Please handle the solar panel with care and avoid over-bending or bump, otherwise this may result in damage to the product. The plastic film is used to protect the panel, it may fall off during use, but it will not affect the solar panel. After long strong sunlight , leave the panel away from flammable materials, such as paper, fallen leaves and so on. 4 Holes on pa. Rilled for fast mounting and securing, perfect for non-permanent installations. The junction box on the panel is sealed and waterproof. Applicable for RV, boat, cabin, tent, yachts, car, trucks, trailers, etc. Installation and operation of solar cell module. Install PV module according to the following conditions. Ambient Temperature: 20 to 40. Operating Temperature: 20 to 80. Borne Snow Pressure: less than 2000Pa. Borne Wind Pressure: less than 3000Pa. Water proof: dont soak the PV module in water or continuously expose it to the sprinkling device or under fountains. Corrosion resistance: except for corrosive salt area and sulfurous area. Module shall be installed facing south (northern hemisphere) or north (southern hemisphere). Facing east or west may send only a relatively small amount of electric energy, and incorrect installing orientation will cause a loss in energy output. Series-connected PV module shall be installed in the same direction and with the same angle, because different directions and angles may cause loss of energy due to the differences of solar radiation. Installation of module shall avoid under shadows. Even though the module decreases loss of energy through bypass diode, the shadow will cause loss in energy output. Under normal circumstances, the module generates more current and voltage in routines than in the standardized testing conditions, therefore, please operate the configuration by multiplying 1.25 times of the short-circuit current and open-circuit voltage during the installation and application. The module must be installed on the roof with fire proof function. Connector for installation and connection needs to obtain the approved certification of connector (VDE V 0126-3). Junction box with the type required by the installation and connection needs to obtain the approved certification of junction box (2 PFG1162). Cables with the type required by the installation and connection need to obtain the approved certification of cables (2 PFG1161). When installing modules in batches, the interval distance between modules shall be larger than 100mm. Firstly, place the solar cell module with certain angle (generally 30° or 45°in horizontal plane), and choose a direction that can let the sunlight directly radiate the solar cell module for more time to place the module. Module and bracket shall be fully contacted with the ground. When installing modules, keep away from ignition source or fuels. Installation structure and bracket must bear external pressures such as wind pressure and snow pressure. Installation structure shall be environment resistant and chosen appropriate materials and preservative treatment. Method for high altitude installation shall be appropriate. High falling may cause death, disability and damages. It is forbidden to disassemble, bend, toss the module, nor shock it by hard objects or walk on it. Wire Connection and Precautions. Open the junction box, connect the red wire to the positive pole (+) and the black wire to the negative pole (-) and insert the other end to the interface of the solar cell wire of the battery cabinet. Fasten the module on the bracket by fastening piece and module mounting hole, the hardness and intensity of the fastening piece and module bracket must achieve the standard and be in accordance with relevant requirements. Use the private joint provided by the company. Note: short-circuit for positive and negative poles are forbidden. The joint shall be tightened without any clearances; otherwise, the clearances may cause sparks. Check if the fastening part of the installation structure is loosen; otherwise, it must be tightened. Often clear the dust and dirt on the surface of the PV module with soft cloth to prevent the loss in energy output due to the block on the surface of the module. Check frequently if the surface of the module is blocked by objects. Replace modules with the same specifications and the same type products. Be careful not to contact the exposed part of the wire or joint, and if it is necessary, wear the insulator such as tools, gloves, etc. During the process of installation and maintenance, be sure to cover the surface of the module with cloth or other light proof materials, because the module will generate high voltage under solar radiation which would be dangerous. Through the highest standards of European testing. Our strength guarantees quality and quantity. The item “110W 18V Flexible Solar Panels Foldable + 12V Controller For Car Battery” is in sale since Tuesday, April 2, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “dokio1985″ and is located in Edwardsville, Illinois. This item can be shipped to United States.

  • Short-Circuit Current (Isc): 6.35A
  • Number of Panels: 2
  • Wattage: 110
  • MPN: Does Not Apply
  • Weight:: 3.1 kg
  • Brand: DOKIO
  • Dimensions:: 710 x530*2 x 5mm
  • Type: Solar Panel
  • Maximum Power Current (Imp): 6.1A
  • Maximum Power(Pmax):: 110W
  • Voltage: 18 V
  • Open-Circuit Voltage (Voc): 22.5V
  • Features: All Daylight Conditions
  • Country/Region of Manufacture: China
  • Materia: Monocrystalline Silicon
  • Application: Camping/Hiking
  • Maximum Power Voltage(Vmp): 18.00V
  • Nominal Operating Cell Temp.(NOCT): -45 to 80
  • Product Line: Sunny Boy

Comments Off

Posted in 110w

Tagged , , , , , ,

4′ x 20′ Sungrabber Pool Solar Replacement (ING) Panels 2018 (2 2′x20′ panels)

Posted on March 9, 2019 by admin| Comments Off
4' x 20' Sungrabber Pool Solar Replacement (ING) Panels 2018 (2 2'x20' panels)


BRAND NEW REPLACEMENT PANELS. SUNGRABBER INGROUND OR ABOVE GROUND SOLAR SWIMMING POOL. HEATING PANELS 4′ 3 X 20′ total area. NO HARDWARE INCLUDED WITH PANELS. (2) 2′ X 20′ SOLAR PANELS HI-Flow. THIS IS A 80 , 000 + BTU SWIMMING POOL SOLAR HEATING PANEL. FREE HEAT FOR ABOVE GROUND OR iNGROUND SWIMMING. SunGrabber ABG Solar Pool Heater Panels. EACH BOX CONTAINS 2 PANELS (2′X20′) = 4×20= 80 square feet. SunGrabber ABG PANELS have been designed to heat your Above ground pool with the best solar technology in the industry. Benefits of Solar Pool Heating. Solar energy uses the sun’s rays to produce heat or electricity. SunGrabber’s technology uses the sun’s natural energy in a cost-effective way to warm the water in your pool. Heats your pool to a warm, comfortable temperature. Is environment-friendly energy – free from the sun. Doubles your swim season with luxuriously warm water. Dramatically reduces or eliminates pool heating costs. Adds value to your pool and to your home. The bottom line is SunGrabber pool heaters use natural solar energy in an easy, safe, and cost-effective way. Increases your pool water temperature up to 10 degrees. Most efficient solar panel in the industry – producing over 80,000 BTUs a day. Compatible with your existing pool pump. Better than a gas heater – no gas line, no gas bills, no pollution. Made in the USA with quality you can count on. The item “4′ x 20′ Sungrabber Pool Solar Replacement (ING) Panels 2018 (2 2′x20′ panels)” is in sale since Tuesday, March 23, 2010. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “sungrabsolar” and is located in Junction City, Oregon. This item can be shipped to United States.

  • Product Type: Heaters & Heating Systems
  • heaters – power source: solar
  • Model: 20′
  • Country/Region of Manufacture: United States
  • Power Source: Solar
  • MPN: 260-7
  • Brand: Sungrabber

Comments Off

Posted in sungrabber

Tagged , , , , ,

Span Aria Label Remove Rust From Metal And Panels The Easy Way Video 1 By Dave Ailey 9 Years Ago 5 Minutes 37 Seconds 2 834 739 Views Remove Rust From Metal And Panels The Easy Way Video 1 Span

Posted on December 14, 2018 by admin| Comments Off

Comments Off

Posted in span

Tagged , , , , , , , , , , , , , ,

2 4′x12′ Inground Pool Solar Panels WithRoof Kits 10 yr(4 panels x 2′ wide x 12′)

Posted on December 21, 2017 by admin| Comments Off
2 4'x12' Inground Pool Solar Panels WithRoof Kits 10 yr(4 panels x 2' wide x 12')


HEATING PANELS 2–4′ X 12′ (8′x12′ Total Panel size assembled) 2 boxes (2- 2×12′ panels per box). FOR ANY Size Inground Pools. Includes one System kit and roof mounting kits. PANELS MOUNT LONGWAYS or HORIZONAL BESIDE A SWIMMING POOL OR ROOF. THIS IS A 96,000 BTU + SWIMMING POOL SOLAR HEATING PANEL system. FREE HEAT FOR Inground GROUND SWIMMING POOLS. One kit required for up to 220 square footage of pool surface (APPROX). SunGrabber ING Solar Pool Heater Panels. Includes 4 PANELS (2′X12′), System kit and roof mount kits. All you need is Pvc piping. SunGrabber ING PANELS have been designed to heat your Inground pool with the best solar technology in the industry. Benefits of Solar Pool Heating. Solar energy uses the sun’s rays to produce heat or electricity. SunGrabber’s technology uses the sun’s natural energy in a cost-effective way to warm the water in your pool. Heats your pool to a warm, comfortable temperature. Is environment-friendly energy – free from the sun. Doubles your swim season with luxuriously warm water. Dramatically reduces or eliminates pool heating costs. Adds value to your pool and to your home. The bottom line is SunGrabber pool heaters use natural solar energy in an easy, safe, and cost-effective way. Increases your pool water temperature up to 10 degrees. Most efficient solar panels in the industry – producing over 96,000 BTUs a day (4 panels). Compatible with your existing pool pump. Better than a gas heater – no gas line, no gas bills, no pollution. Made in the USA with quality you can count on. Start swimming in warm water today with our Easy Do-it-Yourself Installation. FOR MORE INFO GO TO SUNGRABBER WEB SITE. The item “2 4′x12′ Inground Pool Solar Panels WithRoof Kits 10 yr(4 panels x 2′ wide x 12′)” is in sale since Thursday, March 17, 2011. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “sungrabsolar” and is located in Junction City, Oregon. This item can be shipped to United States.

  • Brand: Sungrabber
  • Product Type: Heaters & Heating Systems
  • heaters – power source: solar
  • Material: Polymer w/ UV Inhibitors
  • Model: 12′
  • MPN: 272-2
  • Country/Region of Manufacture: United States

Comments Off

Posted in 4x12

Tagged , , , , , , ,

4′x20′ Above Ground & In-Ground Swimming Pool Solar Heating Add On Panels

Posted on September 28, 2017 by admin| Comments Off
4'x20' Above Ground & In-Ground Swimming Pool Solar Heating Add On Panels



4′x20′ Above Ground & In-Ground Swimming Pool Solar Heating Add On Panels. These add on panels are compatable with both the 2′ x 20′ and 4′ x 20′ Sun2Solar system kits. Add on panels do not include fittings. Compatible with our item #’s 805401, 805404 and 805405. Kit Includes: (2) 2′x20′ panels, (4) rubber caps & (1) rubber cylinder. The item “4′x20′ Above Ground & In-Ground Swimming Pool Solar Heating Add On Panels” is in sale since Wednesday, January 18, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “savemoreonpoolsupplies” and is located in Tonawanda, New York. This item can be shipped to United States.

  • Brand: RX Clear
  • MPN: 805431
  • Model: (2)-2′x20′ Solar Panel

Comments Off

Posted in 4x20

Tagged , , , , , , ,