The Aquastrong PSP200-HV 2 HP 220V Swimming Pool Pump is a reliable and powerful standard pool pump designed for efficient water circulation in swimming pools. With a minimum pump power requirement of 2 hp and a voltage of 220V, this pump ensures smooth and effective operation. Whether you are looking to replace an existing pool pump or upgrade to a more powerful one, the Aquastrong PSP200-HV is a solid choice for maintaining a clean and well-maintained swimming pool.
American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. InGround Swimming Pool Pump Motor w/ Strainer Generic Hayward Replacemen 1.5HP. WHY SHOP WITH BLTPRESS? Item was as described and arrived quickly. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. POWERFUL PUMP: Featuring an advanced impeller, this self-priming pool pump achieves a maximum speed of 3450 r/m, a maximum flow rate of 6498 GPH, lifting water flow up to 50.8 ft; It withstands water temperatures up to 122°F; The 1.5 HP 1100W Copper wire motor accommodates input voltages of 115V or 230V, ensuring a more efficient, safer and quieter pool cleaning; The voltage adjustment button is integrated into the pump motor, enabling easy voltage switching STURDY & SAFE: The full body is constructed with commercial-grade reinforced thermoplastic that resists corrosion, ensuring superior strength and durability; The one-piece structure pump is IP55 waterproof and equipped with o-rings for high resistance and leakage avoidance; Built-in automatic thermal overload protector protects from overheating; Comes with a 38.5 in cord to ensure its safety and energy efficiency DETAIL ORIENTED: The strainer is designed with an extra-large filter basket that is detachable for easy cleaning; The see-through lid allows you a clear internal viewing; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers WIDE APPLICATIONS: Female and slip union connection for tool-free installation; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools; Comes with a pool pump, 2 x 1.5 in & 2 in PVC pipe fittings, 2 x 1.25″-1.5″ PVC hose fittings and 1 x manual, which is convenient for you to connect the pipe IMPORTANT NOTE: Never turn on the pump without first filling it with water to avoid damage to mechanical seals and impellers; It is very important to check if the pump is filled with water before turning it on; First, check if the drain plug off the pump is inserted, and if so, fill more water into it; The excess water will seep into the pipeline and help generate suction. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Internal Thread diameter : NPT 1.5″ External Thread diameter : G2.25″. Certification : CSA and ETL. 1.5HP Dual voltage Swimming Pool Pump x 1. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification.
Poolmaster 20178 5-Inch Aluminum-Back Swimming Pool Algae Brush with Stainless Steel Bristles, Classic Collection. Pool wall brush for cleaning gunite swimming pool walls with hard-surface finish. 5-inch straight body design, die-cast aluminum back and handle, stainless-steel bristles. Compact size for hard-to-reach places; also works great as a BBQ grill brush and BBQ tool. Please do NOT use on vinyl liners or fiberglass surfaces; for inground gunite pools or spas.
1.5/2.0/2.5 HP Powerful Self Primming Swimming Pool Pump for in/Above Ground Pool. About 1.5/2.0/2.5HP Swimming Pool Pump with Timer. HIGH-PERFORMANCE PUMP – The 1.5/2.0/2.5 HP DOE-certified motor is equipped with copper wire that can keep the pump efficient, stable, and safe; The max flow can reach 6360/7140/8880 GPH, while the max head is 52.5 ft; It also provides thermal protection, which allows for a longer service life compared to an ordinary motor; The impeller can and ensure efficient water circulation. INTEGRATED TIMER – Equipped with a built-in programmable dual-mode timer, our self-priming pump offers convenience by automating pump operation based on your preference; With 9 options ranging from 2 to 24 hours, the timer repeats the cycle daily or only runs for one single cycle until the next set; The timer allows you to schedule operation during off-peak hours, saving energy consumption and utility costs and freeing up time for other activities. DURABLE STRUCTURE – The whole body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The pump is IPX5 waterproof and can withstand high-temperature liquid up to 122? ; It also comes with a UL-certified cord to ensure its safety and energy efficiency. USER-FRIENDLY DESIGN – Equipped with a detachable large filter basket, it effectively filters leaves, debris, and large gravel; The transparent cover allows users to inspect the internal condition at any time, making it convenient to determine whether cleaning is needed; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. EASY OPERATION – The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards, meeting customers’ needs for seamless hose connections; Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks. Product & Package Information of 1.5HP. Ampere: 11.5 A. Thread Diameter: 1.5 & 2 inches. Head: 52.5 ft. 1.5 Inch Interface x 2. Flow Rate:106 GPM. 2.0 Inch Interface x 2. Product & Package Information of 2.0HP. 1.5” PVC Pipe Fitting x 2. Flow Rate:119 GPM. 2.0” PVC Pipe Fitting x 2. Product & Package Information of 2.5HP. Ampere: 8.5 A. Flow Rate:148 GPM. About 1.5HP Swimming Pool Pump without Timer. With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6360 GPH, lifting water flow up to 52.5 ft; Withstands water temperatures up to 122°F. The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. : Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. / : The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. Always fill the pump with water before turning it on; Check that the drain plug is tightly closed and refill until water overflows; Excess water will prime the system and protect internal parts. 1.5 in Connectors x 2. 2 in Connectors x 2. 1.25 -1.5 in Pipe Fittings x 2. Nozzle Internal Diameter:G1 1/2. Max Head:52.5 FT. Nozzle External Diameter:G2 1/4. Power Cord:35.8 in/0.91 m(American three-pin plug). PVC Glue Recommended:PVC Cement, Clear PVC Solvent Glue, Gray PVC Solvent Glue. Pipe Size:1.5/2.0 in. Package Weight: 29.3 lb. About 2.0HP Swimming Pool Pump without Timer. HIGH-PERFORMANCE PUMP: With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6950 GPH, lifting water flow up to 60.0 ft; Withstands water temperatures up to 122°F; The 2 HP 1500W DOE-certified motor is equipped with copper wire that can keep the pump efficient and extend its lifespan. DURABLE & UL CERTIFIED: The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. EFFICIENT WORK, FAST DRAIN: Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. EASY OPERATION: The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ON/OFF SWITCH FOR EASY CONTROL: The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. IMPORTANT NOTE: Never turn on the pump without first filling it with water to avoid damage to mechanical seals and impellers; It is very important to check if the pump is filled with water before turning it on; First, check if the drain plug off the pump is inserted, and if so, fill more water into it; The excess water will seep into the pipeline and help generate suction. Item Weight: 25.4 pounds. We do not have access to your full financial details. Leaving Feedback: We appreciate your feedback! Positive ratings help us grow our business. We serve clients worldwide with a focus on reliability, competitive pricing, and exceptional service. Your trust and partnership are valued, and we strive to enhance your experience through dedicated support and consistent performance. Thank you for being part of our story.
Poolmaster 20178 5-Inch Aluminum-Back Swimming Pool Algae Brush with Stainless Steel Bristles, Classic Collection. Pool wall brush for cleaning gunite swimming pool walls with hard-surface finish. 5-inch straight body design, die-cast aluminum back and handle, stainless-steel bristles. Compact size for hard-to-reach places; also works great as a BBQ grill brush and BBQ tool. Please do NOT use on vinyl liners or fiberglass surfaces; for inground gunite pools or spas.
1.5 / 2.0 HP Powerful Self Primming Swimming Pool Pump with ON/OFF Switch for In/Above ground Pool w/ 1.25”&1.5&2.0” Union. About 1.5HP Swimming Pool Pump without Timer. ??????? -?????????????????????????????? : With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6360 GPH, lifting water flow up to 52.5 ft; Withstands water temperatures up to 122°F. ??????????????????????????????? : The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. ????????????????????????? , ?????????????????? : Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. ??????????????????????????????? : The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ??? /?????????????????????????????????????????????? : The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. ??????????????????????????????????? : Always fill the pump with water before turning it on; Check that the drain plug is tightly closed and refill until water overflows; Excess water will prime the system and protect internal parts. 1.5 in Connectors x 2. 2 in Connectors x 2. 1.25 -1.5 in Pipe Fittings x 2. Nozzle Internal Diameter:G1 1/2. Max Head:52.5 FT. Nozzle External Diameter:G2 1/4. Power Cord:35.8 in/0.91 m(American three-pin plug). PVC Glue Recommended:PVC Cement, Clear PVC Solvent Glue, Gray PVC Solvent Glue. Pipe Size:1.5/2.0 in. Package Weight: 29.3 lb. About 2.0HP Swimming Pool Pump. HIGH-PERFORMANCE PUMP: With the advanced impeller and superior internal flow design, this self-priming pool pump achieves a maximum flow rate of 6950 GPH, lifting water flow up to 60.0 ft; Withstands water temperatures up to 122°F; The 2 HP 1500W DOE-certified motor is equipped with copper wire that can keep the pump efficient and extend its lifespan. DURABLE & UL CERTIFIED: The pool pump body is constructed from commercial-grade, corrosion-resistant, reinforced thermoplastic for superior strength and durability; The motor shell is made of an aluminum casing for impact resistance and fast heat dissipation; It is IPX5 waterproof and equipped with o-rings for leakage avoidance; Comes with a 38.5 in cord to ensure its safety and energy efficiency. EFFICIENT WORK, FAST DRAIN: Equipped with a detachable large filter basket, it effectively filters leaves, debris and large gravel; The transparent cover is convenient for users to check the internal condition at any time and clean up in time; There is a drain plug on the bottom for easy drainage; Note: Please do not turn on the pump without filling the water, or it will cause damage to the mechanical seal and impellers. EASY OPERATION: The pool pump is equipped with adapters compatible with both 1.5-inch and 2-inch PVC pipe sizes, like V40 and N50, in compliance with US standards (fits 1.25-inch and 1.5-inch PVC Hose); Teflon tape needs to be wrapped between the female and slip unions to seal and prevent leaks; Suitable for swimming pools, hot tubs, thermal springs, spas and irrigation systems, but should not be used with storable pools. ON/OFF SWITCH FOR EASY CONTROL: The built-in on/off switch adds convenience, allowing you to control the pump with a simple touch; This feature eliminates the need for manual plugging and unplugging, making it easy to operate; The switch is designed to be waterproof, ensuring reliable performance; This pump also provides thermal protection, ensuring safety use with ultra-low noise. IMPORTANT NOTE: Never turn on the pump without first filling it with water to avoid damage to mechanical seals and impellers; It is very important to check if the pump is filled with water before turning it on; First, check if the drain plug off the pump is inserted, and if so, fill more water into it; The excess water will seep into the pipeline and help generate suction. Item Weight: 25.4 pounds. We do not have access to your full financial details. Leaving Feedback: We appreciate your feedback! Positive ratings help us grow our business. We serve clients worldwide with a focus on reliability, competitive pricing, and exceptional service. Your trust and partnership are valued, and we strive to enhance your experience through dedicated support and consistent performance. Thank you for being part of our story.
Specification Material: Copper Wire, PP Model: SPP1500A-D Color: Black Assembly Required: Yes Mounting Type: Floor Mount Protection Class: IPX5 Noise: About 70dB Plug Type: US Standard Timing Range: 2-24h Hmax: 16m/52.49ft Qmax: 450L/475.51qt/min Power: 1500W Voltage: 110-120V 60Hz Current: 11.5A Motor: 2.0HP Pure Copper Wire Motor CAP: 50? F/250V Max: 50? /122? Inlet & Outlet: G2 1/4 Use: Indoor & Outdoor Power Cable Length: 1.5m/4.92ft Product Length: 546mm/21.5in Package Size: 6035.520.5cm/23.6213.988.07in Gross Weight: 13.8kg/30.42lbs Package Included 1 Pool Pump 1 English Manual Other Accessories for Assembly. 2 HP In/Above Ground Pool Pump 1500W Self Primming Swimming Pool Pump with Timer. Our elaborate 2.0Hp single voltage pool pump is designed for home and small commercial pools. It is equipped with a motor with a powerful 2.0HP to ensure the efficient operation of the pool water circulation mechanism. Whether it is in daily maintenance or deep cleaning, it can handle it easily and create a clear swimming environment for you. This product consists of a high-quality copper wire motor and PP pump body, which is sturdy and durable, not easy to corrode and rust, ensuring a long service life. The 1500-watt pure copper motor delivers a powerful 2.0Hp power, giving it a maximum flow rate of up to 475.51. /min, which greatly increases the rate of water circulation, helping you clean your entire pool quickly. With a maximum head of 52.49 ft, the pump is designed for home and small commercial pools, saving time and cost on manual transportation. This product is designed for single-voltage environments, avoiding complex circuit modifications and fitting into most home power grids. The built-in 24-hour programmable timer starts the pump when you need it. When you select the run time, the pump will run for a set number of hours at the current time of day. The product has built-in overheating protection with IPX5 protection class, which reduces safety risks and extends its service life. This product is easy to operate, you just need to plug it in, set the program and it will run automatically! Simple structure, complete accessories, and detailed assembly illustrations help you finish the installation quickly and use it in a short time. It has a smooth surface and an open structure, so you only need to wipe the dust or residue with a towel. The 4.92 ft power cable reduces usage restrictions and further protects your safety. It is convenient for you to check the filtration at any time so you can determine when the pool needs to be cleaned. It increases the force area with the ground to ensure the stability of the product. This product is suitable for home pools, swimming pools, hot tubs, and spas, etc. Material: Copper Wire, PP. Mounting Type: Floor Mount. Plug Type: US Standard. Motor: 2.0HP Pure Copper Wire Motor. Inlet & Outlet: G2 1/4. Use: Indoor & Outdoor. Power Cable Length: 1.5m/4.92ft. Product Length: 546mm/21.5in. Package Size: 6035.520.5cm/23.6213.988.07in. Gross Weight: 13.8kg/30.42lbs. Other Accessories for Assembly. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please note that before the water pipe is installed, the adapter must be installed to the water pump outlet and inlet. Put the nut on the inner connection, then connect the pipe with glue until the glue sticks to the pipe before screwing it to the water pump. Please note that this product can only be connected to a grounding-type receptacle protected by a ground-fault circuit interrupter(GFCl). To reduce the risk of electric shock, install at least 10 feet from the inside wall of the pool and never use an extension cord. This product is intended for use with permanently installed pools only and is not intended for use with storable pools. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
DOEL 17,100 BTU Swimming Pool Water Heater Heating & Cooling 115V Pool Heat Pump. ?? Mini Pool Heat Pump? The WOPOLTOP 5.2KW pool heat pump is suitable for small above and below ground pools, hot tubs or spas, etc. With a recommended maximum pool capacity of 2,600 gallons for efficient operation. ?? Permium Compressor? The 17100 BTU heat pump is equipped with a high-quality compressor with a COP of up to 5.0, ensuring top-notch performance and stability that is more economical than propane, natural gas and electric heaters. ?? Heating & Cooling Dual Mode? The heat pump has dual functions of heating and cooling with a simple control panel design that makes it easy to set and monitor temperature levels, providing you with endless convenience and peace of mind. ?? Noise Reduction Design? The high quality compressor is equipped with anti-vibration technology, which effectively reduces vibration and dampens noise. Maintains a noise level of around 45 dB at a distance of approximately 1 meter. ?? Easy Installation? No professional installation required, comes with two 1.25″ & 1.5″ water connectors. 115V/60Hz for US electricity, and comes with standard US plug, built-in 14.8 feet power cord, plug and play for convenience. ?? Recommendation? The heat pump needs to be placed in an upright position for both transportation and use to work better. If you want your pool to warm up faster, it is helpful to cover the pool with a solar cover when heating. This product is warehoused in California, USA. But you can apply to cancel the order and place a new one at your new address. The package must be in its original packaging and include all of the original accessories or items that came with it when returning an item. The item and package should be in original and perfect condition. Don’t forget that good communication can solve all problems. Any questions, please feel free to send message to us first. Please remember we are always here to serve you and ensure you a happy shopping experience. Welcome to our store. Our company is specialized in Home & Pet Supplies. It is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place orders. (GMT+8) of Monday to Friday. If you have any questions, please message us and give us a chance to assist you.
EPISTAR LED 6 INCHES -STANDARD SIZE (APROX) MULTI COLOR 102 FT CORD LED POOL LIGHT. THE LIGHT WILL NO COME WITH A NICHE (IF YOU ARE BUILDING A NEW POOL AND NEED THE NICHE LET US KNOW). True white amazing quality. Here is what you get. 100FT heavy duty thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours! 12v version if you are running 120V you will need a simple step down from 120v to 12v from power box much safer than running 120v into the pool. Many states are passing the Law 12v into the pool. This is the full size (spa) size. We also carry the Standard large sizes, 50ft, 100ft. Our price is for a limited time. I will eventually raise the price. This is wholesale level price. The brightest and most efficient LEDs available. Custom reflector and lens eliminate glare and hot spots. Wide angle light position for greater underwater coverage or narrow angle for increased light intensity and distance. Superior lens geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution. Ideal for both residential and commercial pools. Compatible with any standard stainless steel and plastic niches. Epistar LabTM provides services, with our research and development team, to engineers and customers with both general information and project-specific assistance. Our team also provides support and advice regarding system design and implementation, LED component selection, product development tools, and other pertinent design issues. Besides, Epistar LabTM’s major focus is to develop and perfect the mass production of LED chips that will popularize LED general lighting. The leaders of Epistar foresaw LED’s dominance in general lighting as early as 1996. This strategic head-start has allowed us to offer superior chips for everyday illumination. Today our lighting advantage is further enhanced by our dedicated research center- the Epistar LabTM. Why Choose LED vs Traditional Pool halogen light. LEDs are one of the most energy efficient and cost effective light sources available on the market. Their low power consumption, high reliability and long lifespan allow purchasers to realize significant energy savings and maintenance reduction over the lifetime of an LED fixture. Recent advances in LED technology have prompted governments to quickly adopt the technology. With energy demand and prices rising, cities, states and countries are quickly moving to LEDs to reduce the demand on their power grid. Consumers are rapidly realizing the benefits as well. LED lights boast durations of tens of thousands of hours. With this longevity, people may not see the LEDs in their fixtures burn out in their lifetime. In fact, the life of an LED is about 50,000-100,000 hours or just over 11 years of continuous use. The long lifetime of an LED leads to fewer bulbs changed, and fewer bulbs thrown away. Because LEDs use electricity very efficiently, greenhouse gas emissions are also reduced. While traditional lighting sources such as fluorescents use chemicals like mercury, LEDs use phosphor and other safe materials without a negative ecological footprint. Fluorescents have specific instructions for disposal, but an LED can simply be recycled. It must be unused. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Here is what you get: 100FT heavy duty thick cord connected to OEM direct fit Epistar LED pool light rated at over 70,000 hours!! This is the SPA (smaller) size. Features —The brightest and most efficient LEDs available —Custom reflector and lens eliminate glare and hot spots —Wide angle light position for greater underwater coverage or narrow angle for increased light intensity and distance —Superior lens geometry and exclusive reflector design combine to create a wider beam and more uniform light distribution —Ideal for both residential and commercial pools —Compatible with any standard stainless steel and plastic niches, COMES WITH NEW STAINLESS STEAL NICHE AS A BONUS. –12v version Epistar LabTM provides services, with our research and development team, to engineers and customers with both general information and project-specific assistance. Why Choose LED vs Traditional Pool halogen light: LEDs are one of the most energy efficient and cost effective light sources available on the market. EPISTAR LED POOL LIGHT. EPISTAR OVER 50,000+hours Spa LED Swimming Pool Light 12V 100ft Cord V PENTAIR. Compatible with any standard stainless steel and plastic niches, COMES WITH NEW STAINLESS STEAL NICHE AS A BONUS.
Comments Off
Posted in epistar
Tagged 102ft, 50000hours, cord, epistar, light, multicolor, pool, swimming
40,000 Gallons For Hayward W3t-Cell-15 Swimming Pool Salt Chlorine Generator. Condition: 100% Brand New. Capacity:40,000 Gallons. Item Depth:7 in. Item Height:5 in. Item Length:13 in. The Salt Chlorine Generator Is Constructed With High-Quality Materials To Ensure Long-Term Durability And Reliability. It Can Resist Changes In Water, Chemicals, And Temperature, And Can Withstand Harsh Conditions In The Swimming Pool Environment. The Salt Chlorine Generator Has A Large Capacity Of 40000 Gallons To Achieve The Most Efficient And Cost-Effective Chlorination. Compared With Traditional Salt Chlorine Generators, The New Salt Chlorine Generator Can Reduce Chlorine Costs By 50% Or Even More. The Operation Of The Salt Chlorine Generator System Can Disinfect The Swimming Pool, Automatically Generate Fresh And Pure Chlorine, And Self Renew The Supply. Keep Your Skin Clean And Soft, So You Don’t Have To Worry About Dry Skin, Burning Eyes, Green Hair, Or A Pungent Smell Of Chlorine While Swimming. The Installation Requires No Changes To Your Current Setup Or Plumbing. Simply Remove Your Old Cell & Install This One. 1 × 40,000 Gallons Salt Chlorine Generator Kit.