Tag Archives: 115 230v

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo

2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo


2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo



This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 2.0 HP. Temp : 122 Degree Fahrenheit (50 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 2.0HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “2HP Swimming Pool Pump Motor Hayward withStrainer In/Above Ground 115-230V Hi-Flo” is in sale since Sunday, July 11, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

  • Model: 2.0HP
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 122 Degree Fahrenheit (50 Degree Celsius)
  • Power Cord: 59″
  • Item Height: 11.4″
  • Certification: UL Certification
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Item Width: 9.6″
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1500W/2HP
  • Color: Black
  • Energy Star: A+++
  • Type: Pool Pump
  • Installation: Universal Installation
  • Item Weight: 26lbs
  • Brand: VIPSHOPMARKET
  • Manufacturer Warranty: Lifetime
  • Amperage: 12.3/6.1A
  • Water Type: All Water Types
  • Material: ABS
  • Maximum Head Lift: 17 Meter
  • Power Source: Corded
  • Features: Single-Speed
  • Item Length: 22.4″
  • Power: 1500 W
  • Set Includes: Fittings, Full Instructions
  • Recommended Flow Rate: 1500 GPH
  • Suitable For: Above Ground Pools
  • Labels & Certifications: UL Certification
  • RPM: 3450/min
  • Horsepower: 2.0HP
  • Speed: Single-Speed
  • Qmax: 430 L/min
  • Hmax: 17Meter
  • Voltage: 110-120V/220V-240V

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, December 30, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

  • Certification: UL Certification
  • Warranty: Lifetime Warranty
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450RPM
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Type: Pool Pump
  • Installation: Universal Installation
  • MPN: 1.5HP
  • Brand: VIPSHOPMARKET
  • Material: ABS
  • Power Source: Corded
  • Features: Two-Speed
  • Suitable For: Above Ground Pools
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Voltage: 110-120V/220V-240V

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement



Stainless Steel 316 spring applicable for sea water and fresh water. EPDM O-ring provide with high resistance and avoid leakage. Wide voltage design applies to voltage range from 110v to 240v. Bulit-in thermal protector assure long motor lifetime. High-precision Stainless Steel shaft reduce noise to 60 dB. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. Totally Enclosed Fan Cooled. 1.5 HP In-Ground Pump. Compatible with PL30-6 Filter Tank. Self-priming for in-ground functionality. Can be installed as 110V-120V or 220V-240V. Drain plug for easy winterizing. High durability with corrosion proof polymer. Fittings connections: 1 1/2 inch. 5400 GPH MAX Flow Rate:6000GPH. ETL Certificate, UL Certificate for motor. Package included 1xpool pump. The pool pump features a powerful and super-efficient IP55 1200w 1.5HP electric motor. The in-ground pool pump adopts a pure copper motor to achieve stable performance and ensure a long lifespan. The swimming pool pump is designed with an efficient impeller to provide high flow up and high head. Speed Flow:6000GPH; Max. The 1.5HP pool pump has a detachable filter basket to ensure the debris does not enter the pump to extend its service life. The see-through lid allows you a clear internal viewing. Dual voltage with switch design allows more easily installing and voltage changing. A see-thru cover with cam-lock lid for quick inspect and tool-free service. The swimming pool pump is perfect for swimming pools, hot tubs, thermal springs, SPA, and irrigation systems. It can keep you maintaining a crystal clear and sparkling pool. (No service on Weekend and public holidays). All return products should be in brand new state with all accessories included. Reliable performance with 304 grade stainless steel motor shaft. 2 HP In-Ground Pump. Can be installed as 110V or 220V. Amps 18.6/9.3. 5520 GPH MAX Flow Rate:6500. The pool pump features a powerful and super-efficient IP55 1500w 2HP electric motor. Speed Flow: 6500 GPH; Max. Head Lift: 79 ft. The 2HP pool pump has a detachable filter basket to ensure the debris does not enter the pump to extend its service life. The item “1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Monday, July 29, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • Water Type: All Water Types
  • Noise Level: 60dB
  • Item Height: 13 in
  • Item Width: 9 in
  • Material: ABS
  • Energy Star: A+++
  • Maximum Head Lift: 72FT
  • Power Source: Wring
  • Type: Filter Pump
  • Installation: Universal Installation
  • Features: Double Voltage
  • Item Length: 26 in
  • Item Weight: 37.5lb
  • Power: 1200W
  • Set Includes: Pool Pump
  • Brand: iMeshbean
  • Manufacturer Warranty: Lifetime
  • Amperage: 15/7.5 A
  • Suitable For: Above Ground Pools
  • Maximum Flow Rate: 5400 GPH
  • Labels & Certifications: ETL
  • Horsepower: 1.5HP
  • Speed: Single-Speed
  • RPM: 3450
  • Pool Type: In-Ground/Above ground
  • Max. Temperature: 140
  • Voltage: 110V-120V/220V-240V

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement


This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “115-230v 1.5HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Ontario CA. This item can be shipped to United States.

  • Features: Easy Installation
  • Manufacturer Warranty: 5 years
  • Certification: UL Certification
  • MPN: 2040700300
  • Qmax: 410 L/min
  • Item Width: 9.6 in
  • Hmax: 15.5 Meter
  • Installation: Universal Installation
  • Voltage: 110-120V/220V-240V
  • Horsepower: 1.5HP
  • Item Length: 22.4 in
  • Item Height: 11.4 in
  • Amper: 10.8/5.4A
  • Motor Shaft Material: Stainless Steel
  • Suitable For: Above Ground Pools
  • Material: ABS,PVC, Stainless Steel, Copper
  • Minimum Pump Power Requirement: 1 1/2 hp
  • Speed: Single-Speed
  • Model: 1.5HP 110V-240V
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Rated Power: 1100W/1.5HP
  • Item Weight: 26 lb
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Power: 1100 W
  • RPM: 3450/min
  • Power Cord: 59″
  • Pool Type: In Ground &Above Ground
  • Brand: HOMESUPPLIES
  • Warranty: 5 Years
  • Color: Black
  • Energy Star: A+++
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Type: Pool Pump

1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT

1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT


1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR w/ Strainer 2 thread NPT. Dual Voltage super powerful pump for all types and sizes pool, in-ground spas. Big strainer casing allows high water flow. The strainer basket with internal ribs assure flow when filled with leaves and debris. One-piece case without bolts insure super quiet operation. High-tech motor with qualified material provide with cooler running and longer life. 1.5 HP (Total HP:1.8). In-Ground Pump also work with PL30-6 Filter Tank. Flow rate:102GPM 6120GPH. MAX WATER TEMP 104 F. Dual threaded 2 INLET AND OUTLET. Dimension 27″ L x 15″ (H) x11 (W). Heavy Duty Long Lasting Case. 1 x pool pump. 1 set Npt connnector (2 pcs). Kindly note:These pumps are capacitor start and not for use/sale in California. (No service on Weekend and public holidays). All return products should be in brand new state with all accessories included. The item “1.5HP 115-230v IN GROUND Swimming POOL PUMP MOTOR with Strainer 2 thread NPT” is in sale since Tuesday, November 19, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “greenenv” and is located in Pasadena, Texas. This item can be shipped to United States.

  • Horsepower: 1.5hp
  • Speed: single speed
  • RPM: 3450
  • GPH: 6120
  • Hmax: 85ft
  • MPN: J13506
  • Brand: iMeshbean
  • Suitable For: In Ground Pools
  • Pipe size: 2 inch
  • Frequency: 60Hz
  • Amps: 18.6/9.3
  • Pool Type: In-Ground
  • Weight: 30LB
  • Voltage: 115-240v

2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement



2HP IN GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground. Reliable performance with 304 grade stainless steel motor shaft. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. 2 HP In-Ground Pump also work with above. Compatible with DE, sand, and cartridge filter. Self-priming for in-ground functionality. Drain plug for easy winterizing. High durability with corrosion proof polymer. ETL Certificate, UL Certificate for motor. Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Thursday, May 9, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • RPM: 3450
  • GPH: 5520
  • Hmax: 79ft
  • Horsepower: 2hp
  • Speed: Single-Speed
  • Type: Swimming pool motor
  • Pool Type: In-Ground
  • MPN: J15001
  • Brand: iMeshbean

115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement

115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement


2HP IN GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground. Reliable performance with 304 grade stainless steel motor shaft. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. 2 HP In-Ground Pump also work with above Compatible with DE, sand, and cartridge filter Self-priming for in-ground functionality Can be installed as 115V or 230V. Drain plug for easy winterizing. High durability with corrosion proof polymer. Fittings connections: 1 1/2 inch. Volt 115/230 Amps 15/7.5 RPM 3450 88 GPM, GPH:5520 HMAX: 79ft ETL Certificate, UL Certificate for motor Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “115-230v 2HP Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Thursday, May 9, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • RPM: 3450
  • GPH: 5520
  • Hmax: 79′
  • Pipe size: 1.5”
  • Horsepower: 2hp
  • Speed: Single-Speed
  • Voltage: 110-230V
  • Type: Swimming pool pump
  • Pool Type: In-Ground
  • MPN: J15001
  • Brand: iMeshbean

2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH

2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH


1.5/2HP 115-230v IN GROUND Swimming POOL PUMP MOTOR w/ Strainer 2 thread NPT. Dual Voltage super powerful pump for all types and sizes pool, in-ground spas. Big strainer casing allows high water flow. The strainer basket with internal ribs assure flow when filled with leaves and debris. One-piece case without bolts insure super quiet operation. High-tech motor with qualified material provide with cooler running and longer life. 2 HP In-Ground Pump also work with above. 115/230V Dual Watt AMP 25/12.5. MAX WATER TEMP 122 F Dual threaded 2″ INLET AND OUTLET Thermal Protected Dimension 27″ L x 15″ (H) x11″ (W) Heavy Duty Long Lasting Case Weight 55lb. Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2HP 115-230v 2 thread NPT Inground Swimming POOL PUMP MOTOR with Strainer 6500GPH” is in sale since Thursday, August 16, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • RPM: 3450
  • Amps: 25/12.5
  • Hmax: 26m/85.3ft
  • Qmax: 150GPM/9000GPH
  • Horsepower: 2hp
  • Speed: Single-Speed
  • Pool Type: In-Ground
  • MPN: J18006
  • Brand: iMeshbean

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement

1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement


1.5HP IN GROUND Swimming POOL PUMP MOTOR w/ Strainer, High-Flo, Hi-Rate Inground. Reliable performance with 304 grade stainless steel motor shaft. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. 1.5HP Inground pump Compatible with PL30-6 Filter Tank Self-priming for in-ground functionality Can be installed as 110V or 220V. Drain plug for easy winterizing. High durability with corrosion proof polymer. Fittings connections: 1 1/2 inch. NPT Volt 110/220 Amps 15/7.5 3450RPM 88 GPM, HMAX: 72ft 5400 GPH MAX Flow Rate: 6500 ETL Certificate, UL Certificate for motor Kindly note:These pumps are capacitor start and not for use/sale in California. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1.5HP 115-230v Inground Swimming Pool pump motor Strainer Hayward Replacement” is in sale since Thursday, August 16, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.

  • RPM: 3450
  • GPH: 5400
  • Hmax: 72ft
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Pool Type: In-Ground
  • MPN: J15001
  • Brand: Unbranded

1.5HP IN GROUND Swimming spa POOL PUMP MOTOR Strainer above Inground 115/230v

1.5HP IN GROUND Swimming spa POOL PUMP MOTOR Strainer above Inground 115/230v


1.5 hp in-ground pump also work with. Compatible with de, sand, and cartridge fitler. Self-priming for in-ground functionality/font>. Can be installed as 115v or 230v. Drain plug for easy winterizing. High durability with corrosion proof. Fittings connections: 1 1/2 inch. 84 gpm, hmax: 49.2ft. Thank you for your business!

Domestic us 48 states (physical address). Apo, po box, hi, ak, pr. Failure to provide one will result in delays. Available by appointment only. If you need to return your product for any reason, you can arrange for this within 14 days of receiving it.

If the item is damaged, we may request photos of the damage to expedite the process. Returned products must be in their original package and must be still be new and unused condition. Once the item has been return and inspected your return will be processed and completed.

The item “1.5HP IN GROUND Swimming spa POOL PUMP MOTOR Strainer above Inground 115/230v” is in sale since Wednesday, February 26, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Parts & Maintenance\Pool Pumps”. The seller is “durapowers” and is located in Walnut, California.

This item can be shipped to United States and to Canada.