Tag Archives: jacuzzi

Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed

Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed


Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed


Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed


Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed


Jacuzzi JXN264 Low NOx 264K BTU Natural Gas Pool Heater New Sealed


This item is brand new &. Power Source : Propane, Natural Gas. Suitable For : Above Ground Pools, In Ground Pools. At Everyday Fulfillment KC, we take pride in our great customer service. Please allow time for communication after hours and during weekends & holidays. We are not responsible for undeliverable addresses. We DO NOT guarantee, offer or have any control over warranties of any kind. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “everydayfulfillment_kc” and is located in this country: US. This item can be shipped to United States.

  • MPN: 018205
  • UPC: 662021572999
  • Brand: Jacuzzi
  • Type: Heat Pump
  • Power Source: Propane,Natural Gas
  • Suitable For: Above Ground Pools,In Ground Pools
  • BTUh Heating Rating: 264k
  • Model: Jacuzzi JXN264
  • Features: Portable

Jacuzzi JVS165S Professional Grade Variable Speed Pump 1.65 THP BRAND NEW

Jacuzzi JVS165S Professional Grade Variable Speed Pump 1.65 THP BRAND NEW


Jacuzzi JVS165S Professional Grade Variable Speed Pump 1.65 THP BRAND NEW. Jacuzzi® JVS165S Pro Grade Variable Speed Pump 1.65 THP provides the highest quality and exceptional performance to meet your swimming pool’s needs. Elite energy-saving variable speed pool pump. Innovative hydraulic design provides optimal flow. Designed for durability with a chemical-resistant Viton pump seal. Touchless, easy disposal debris bag for hands-free contact to dirt and grime. Simple retrofitting with pump base riser and 1-1/2″ x 2″ CPVC union connections. Permanent magnet, totally enclosed fan cooled (TEFC) motor offers incredible energy efficiency and reliability. Improved motor drive produces high-speed performance and quieter volume. Intuitive, rotatable control pad that can be wall mounted or rotated 4 ways on unit. Side and rear conduit entry for easy installation in both low and high voltage connections. Dual voltage: 115V / 230V. If you have questions, just message me! Thank you for visiting my page. Have a great day and check out my other listings. Please have an address I can send to. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “thatguybuying” and is located in this country: US. This item can be shipped to United States.

  • Brand: Jacuzzi
  • Type: Hydraulic Pump
  • Voltage: 110/230V
  • Model: Jacuzzi JVS165S
  • Features: Variable Speed
  • Suitable For: In Ground Pools
  • UPC: 610377413572

Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack)

Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack)


Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack)


Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack)


Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack)


Fits Jacuzzi 6541-383 J300 PJW60TL-OT-F2S FC-2715 6CH-961 Filter (4 Pack). Tier1 Model Number: PAS-1342-4-PACK. Fits the Jacuzzi Premium J-300 and J400. Tier1 PAS-1342 Replacement for Jacuzzi J300 6541-383, Pleatco PJW60TL-OT-F2S Pool and Spa Filter fits the Jacuzzi Premium J-300 and J400. Tier1 Pool and Spa filters will protect your investment engineered to outperform the competition and exceed your expectations. Featuring high durability filter fabric that maintains strength even when loaded with sediment and sand, a tighter porosity and denser weave to capture more contaminants in less time, and a high strength, high flow core designed to support the filter while providing industry leading flow rates. Tier1 Pool and Spa filters will clean your water faster and more efficiently with less wear and tear on your pump. Dive in with Tier1, the water’s great! COMPATIBLE MODELS: Replacement for Pleatco PJW60TL-OT-F2S, PJW60TL, Jacuzzi J300 6541-383, J400, Filbur FC-2715, Unicel 6CH-961, SD-00641 filtration cartridges. KEEP THE WATER CLEAN: The pleated fabric filter maximizes contact between contaminants and filter media, allowing for greater capacity and contaminant reduction. The durable & washable 60 sq ft fabric has tight porosity and a dense weave which sifts out unwanted hair, leaves, dust, sediment, sand, etc. With a high strength, high flow design. FIT AND DIMENSIONS:The cartridge is designed for systems that use a 6 5/8 Inch (Outside diameter) x 15 1/2 Inch (Length) spa or pool filter. It is recommended that you change your pool or spa filter when the pressure gauge on the filter tank reaches 8 psi above the pressure recorded when first installed. Your filters are guaranteed to be the right fit! Our customer service team is guaranteed to answer your call! You’re guaranteed to find expert help! If you need assistance placing your new order please let us know how we can help! This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “discountfilterstore” and is located in this country: US. This item can be shipped to United States.

  • Model: PAS-1342-4-PACK
  • Filter Life (months): 3 months
  • eBay Used in Brands: Fits the Jacuzzi Premium J-300 and J400
  • Bottom Hole Size: 2 inches SAE
  • Filbur Numbers: FC-2715
  • Top Hole Size: Open Top
  • Unicel Numbers: 6CH-961
  • Size: 4-Pack
  • MPN: PAS-1342-4-PACK
  • Brand: Tier1
  • Compatible Model: Tier1
  • Type: Air Filters
  • Sub Type: 1\

11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa

11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


Sign up to Newsletters. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Here’s our fixed price listing. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa” is in sale since Friday, August 25, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “happykisssoul” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • Material: Stainless Steel
  • Brand: VEVOR VV
  • MPN: ST11KW
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3
  • UPC: 699925985594

Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter with 6-Way Valve

Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter with 6-Way Valve


Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter with 6-Way Valve


Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter with 6-Way Valve


Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter w/ 6-Way Valve. This jacuzzi laser sand filter has been engineered to evenly direct water across the entire surface of the filter sand, without causing sand migration or channeling. The underdrain and side-slotted laterals draw water evenly across the sands surface which allows for higher flows, longer cycles, better filtering and more efficient backwashing. The filter features a 6-way dial valve with 6 different functions. The non-corrosive resin clamp offers simple installation and service of the dial valve and the filters components. The blow-molded tank is UV and corrosion-resistant. With a deep, high-capacity sand bed, it can carry more debris and extend the filter cycles between backwashings. The tanks bottom drain makes draining and winterizing a breeze. Hose and hardware is included with this filter. Tank holds 200 lbs. Sand (Sand not included). The item “Jacuzzi Laser 19 Inch Above Ground Swimming Pool Sand Filter with 6-Way Valve” is in sale since Monday, June 3, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Filters”. The seller is “savemoreonpoolsupplies” and is located in Tonawanda, New York. This item can be shipped to United States.

  • Brand: Jacuzzi
  • MPN: FLT-94089192
  • Model: Laser
  • Application: Above Ground Pools
  • Type: Sand Filter System
  • Pool Type: Above-Ground

Jacuzzi Laser 22.5 Inch Above Ground Swimming Pool Sand Filter with7-Way Valve

Jacuzzi Laser 22.5 Inch Above Ground Swimming Pool Sand Filter with7-Way Valve


Jacuzzi Laser 22.5 Inch Above Ground Swimming Pool Sand Filter with7-Way Valve


Product for the PoolSupplies lineup. Jacuzzi Laser 22.5 Inch Above Ground Swimming Pool Sand Filter w/7-Way Valve. (when you call please reference source code L15YDPD). Jacuzzi’s Sand filter systems are recommended for above-ground and consist of a Jacuzzi pump connected to a Laser Sand filter with a top mounted dial valve, all of which bolts to a platform base. This 22.5 above-ground sand filter includes a top mounted 7-position multi-port valve and has a high capacity sand bed to catch more debris and extends filter cycles. A unique freeze resistant underdrain with “snap-fit” side-slotted laterals draw water evenly across the full diameter of the sand bed for higher water flow rates, better filteration, longer life cycles, and more efficient backwashing. Sand capacity (sand not included). Includes 7-position multi-port valve. Our experienced staff can assist in walking you through the checkout process. If you do not want an item left at your doorstep, the best thing to do is leave a note on your door with instructions for the driver. A copy of your invoice and Order # should be included, and your Return should be insured. A damage claim will be filed on your behalf and we will replace the item immediately once the claim is approved. Contact our customer service department and an immediate replacement order will be prepared for you. There are product categories which are not returnable, due to hygienic, sanitary, or other reasons, as required by the respective Manufacturers. In certain cases, we may require pictures, and or a sample of the defective item. The free listing tool. The item “Jacuzzi Laser 22.5 Inch Above Ground Swimming Pool Sand Filter with7-Way Valve” is in sale since Thursday, May 01, 2014. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Parts & Maintenance\Pool Filters”. The seller is “savemoreonpoolsupplies” and is located in Tonawanda, New York. This item can be shipped to United States.

  • Brand: Jacuzzi
  • Model: Laser
  • Application: Above Ground Pools