Daily Archives: April 28, 2014

24′x48 Round Beaded MYSTIQUE Above Ground Swimming Pool Liner-25 Gauge

24'x48 Round Beaded MYSTIQUE Above Ground Swimming Pool Liner-25 Gauge


Product for the poolsupplies lineup. 24′x48 round beaded mystique above ground swimming pool liner-25 gauge. (when you call please reference source code l14ydpg). Standard beaded liners work differently than standard pool or overlap liners. Beaded liners “snap & slide” into a bead receiver installed on your pool. If you currently have an overlap-type swimming pool, you can convert your swimming pool to a beaded-type pool easily by purchasing bead receiver. This liner is 25 gauge virgin vinyl. The higher the gauge, the thicker your liner will be. The gauge (thickness) of pool liners will have a large effect on the durability of the vinyl liner. Most liners are available in 20 gauge, and 25 gauge. The standard gauge for swimming pool vinyl liners is around 20 gauge, but you should consider investing in a thicker swimming pool liner if you expect some wear and tear at your pool parties.

Our liners are made lap seam constructed. This means that you have extra protection at the seams, and they will not fray or deteriorate over time, like the cheaper chinese-made liners.

Many colors & sizes available, made to fit almost all pools. Lap welded seams, reducing both lateral and vertical tension. Extra heavy duty, 100% virgin vinyl material. Protected against chemicals and uv fading best cold crack resistance in the industry. American made liner quality features. High temperature curing, computer controlled process insures that 100% of the material is “vulcanized” to the highest possible tolerances. Vacuum sealed, high volume air pumps combined with electronic air filters remove all impurities before bonding. High pressure heat bonding, computer balanced combination of high pressure and exact temperatures insures a void-free permanent bond. The most technically advanced radio frequency vinyl welding reduces the chance of cold spots in the seaming process. Hand folded flat, to reduce wrinkles unliked automated packers that twist and force the liner into the box which can cause permanent creasing. Please note that warranties are for product replacement only based on defective workmanship or materials.

Please note: once the liner has been taken out of the box, the liner is not returnable unless it is defective. Please make sure you measure your pool before purchasing the liner. Measuring your pool for a new liner is a simple process. There are generally a few things we need to know so the correct liner can be delivered to you.

On a round pool all you need is 2 measurements. From inside the pool at the bottom of the wall, measure directly across to the other side at the same height. Do this in two locations in the pool so you get the correct measurement. We recommend measuring from the wall at the bottom track location.

On an oval pool you do the same thing as a round except that you do it in the middle of the pool from side to side and at the ends at the longest point from end to end. All measurements are from inside the pool touching the wall at the base. Depth of the pool can range from 36″ to 54″ deep. Most liners are for 48″ or 52″ sidewall pools.

If your pool has water in it measure out at least 2 ft. From the sidewall with a measuring tape to the point at the top of the wall or where the liner is attached. Bear in mind that most round liners are made to be flat bottom and not a deeper middle you may need an expandable liner. Most common types of liners. Overlap: this type is the most common and simply folds over the corrugated metal wall and drapes down on the outside of the wall.

The liner is held in place by plastic coping strips. You may wish to replace these if your old ones are brittle and dry. Beaded: this type of liner has a thick-formed extrusion at the top that hooks into a female receptor around the top of the pool wall on the waterside.

Most pools can utilize the standard bead that is common in the industry. Incidentally, you can change your overlap liner to accept a beaded liner by simply adding bead receiver strips to the order. This way, if you need to change the liner in the future, you do not have to remove the top seats of the pool. This is a real timesaver and is much easier to reinstall.

Unibead:unibead liners are unique because of its two-in-one liner feature that gives you the option to use the liner as a beaded liner which requires a bead receiver; or as a j-hook liner, which just hooks onto the wall of the pool. Additionally, unlike an overlap style liner, this liner will not be seen on the outside wall of the pool. Please note: this information is intended to answer many questions you may have regarding the type and size liner you may need. Our experienced staff can assist in walking you through the checkout process. If you do not want an item left at your doorstep, the best thing to do is leave a note on your door with instructions for the driver.

A copy of your invoice and order # should be included, and your return should be insured. A damage claim will be filed on your behalf and we will replace the item immediately once the claim is approved. Contact our customer service department and an immediate replacement order will be prepared for you. In certain cases, we may require pictures, and or a sample of the defective item. These items cannot be returned to the merchant. Monday – sunday 6:00am – 9:00pm est. The item “24′x48 Round Beaded MYSTIQUE Above Ground Swimming Pool Liner-25 Gauge” is in sale since Thursday, August 01, 2013. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Parts & Maintenance\Pool Liners”. The seller is “poolsupplies” and is located in Tonawanda, New York. This item can only be shipped to United States.

Recent searches

  • 24x48 Round Beaded Monterey White Above Ground Swimming Pool Liner-25 Gauge
  • beaded 24x48 pool liners
  • Mystique Pool Liner
  • replacement liner mystique 24