Tag Archives: replacemen

2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen

2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


2.5HP Swimming Pool Pump In/Above Ground 1850w Motor Strainer Hayward Replacemen


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor. WHY SHOP WITH BLTPRESS? Item was as described and arrived quickly. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. How to use 1. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician. Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40? The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction. Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source. Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance. Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Voltage : 110V / 60Hz. Head : Max 19m / 62.34ft. Inlet : 1.5 Internal. Outlet : 1.5 Internal. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. SPPE250 Swimming Pool Pump x 1. White Connectors x 2. User’s Manual x 1. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “best_factory” and is located in this country: US. This item can be shipped to United States.

  • Brand: BESTFACTORY
  • Type: Pool Pump
  • Voltage: 110 V
  • Pool Type: In Ground &Above Ground
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1850W/2.5HP
  • Color: Black
  • Amper: 16A
  • Horsepower: 2.5HP
  • Speed: Single-Speed
  • Qmax: 560 L/min
  • Hmax: 21 Meter
  • Frequency: 60HZ
  • Max. Flow: 560 L/min
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59\
  • Certification: UL Certification
  • Warranty: Lifetime
  • Manufacturer Warranty: Lifetime
  • Power: 1850w
  • Model: 2.5HP 110V
  • Features: Easy Assembly, Noise Vibration Reduction, Portable, Rust Resistant
  • Item Height: 12.2\
  • Item Length: 22.4\
  • Item Width: 6.9\
  • Material: ABS, Brass, Stainless Steel
  • Maximum Head Lift: 19m / 62.34ft
  • Inlet: 1.5\
  • Outlet: 1.5\
  • Capacitor: 25 F
  • Pipe Compatibility: Fit 1.5 inch plumbing internally
  • Noise Level: <65dB
  • Size: 22.4\
  • Item Weight: 10.2 kg / 22.5 lbs
  • Energy Star: No complaint
  • Installation: Universal Installation
  • UPC: 0283961330595
  • EAN: 0283961330595
  • MPN: 4AZY8007
  • Suitable For: Above Ground Pools

1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen

1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen


This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “1.5HP InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “fansdealonline” and is located in Westbury, New York. This item can be shipped to United States.

  • Brand: FANSDEALONLINE
  • Voltage: 110-120V/220V-240V
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450/min
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 2 Years
  • Horsepower: 2hp
  • Model: 2040700300
  • Style: Modern
  • Custom Bundle: No
  • Pool Type: Above-Ground
  • Type: Filter Pump
  • MPN: 2040700300

InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP

InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean. Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. 4, The Pump stop working suddenly. Causes: Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Horsepower : 1.5 HP. Temp : 104 Degree Fahrenheit (40 Degree Celsius). Hmax : 15.5 Meter. Certification : CSA and ETL. 1 x 1.5HP Dual voltage Swimming Pool Pump. This Swimming Pool Pump has a ETL/CSA Certification to ensure recognized Standards for Safety. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy. Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy. High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5″ NPT (fit for 1.5″ male threaded adapter). We have Four warehouses located in CA, NY, NJ & GA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. The item “InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP” is in sale since Wednesday, July 22, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “homesupplies01″ and is located in Westbury, New York. This item can be shipped to United States.

  • Brand: HOMESUPPLIES
  • Voltage: 110-120V/220V-240V
  • Motor Shaft Material: Stainless Steel
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Rated Power: 1100W/1.5HP
  • Color: Black
  • Amper: 10.8/5.4A
  • RPM: 3450/min
  • Speed: Single-Speed
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Frequency: 60HZ
  • Max. Flow: 6500 GPH
  • Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
  • Power Cord: 59″
  • Certification: UL Certification
  • Warranty: 5 Years
  • Horsepower: 2hp
  • Model: 2040700300
  • Style: Modern
  • Custom Bundle: No
  • Pool Type: Above-Ground
  • Type: Filter Pump
  • MPN: 2040700300

1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen

1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen


1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen



UL Certification for motor, longer lasting than those without certification. High performance, energy saving motor with stainless steel shaft could stand wear and tear. High efficiency, low maintenance and reliability. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24″-26″ sand filter and above-ground pools. Horsepower: 1.5 HP. Temp: 104 Degree Fahrenheit (40 Degree Celsius). 1x 1.5HP Dual voltage Swimming Pool Pump. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. The item “1.5HP InGround Swimming Pool Pump Motor Strainer Generic Hayward Replacemen” is in sale since Wednesday, February 19, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “jamaris_0″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Model: Swimming Pool Pump
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Pool Type: In Ground &Above Ground
  • Type: Pool Pump
  • MPN: 2040700300
  • Brand: Hongmotor
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Power: 1100W/1.5HP
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP

InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP


Features: UL Certification for motor, longer lasting than those without certification High performance, energy saving motor with stainless steel shaft could stand wear and tear High efficiency, low maintenance and reliability Rugged weather-resistant construction Extremely quiet operation Transparent cover helps to judge if the basket needs clean or not Massive strainer basket holds extra capacity Suggested Installation: 24″-26″ sand filter and above-ground pools Specifications: Horsepower: 1.5 HP Speed: 3450 RPM Dual voltage: 110-120V/220-240V Max. Flow: 6500 GPH Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius) Power Cord: 59 Package Contents: 1x 1.5HP Dual voltage Swimming Pool Pump. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. Problem Description:The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. Solution: When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. Problem Description: Pump motor trip. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. The pump prevents the inlet from entering the water and burns the motor. Problem Description:There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. Problem Description: The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. The item “InGround Swimming Pool Pump Motor with Strainer Generic Hayward Replacemen 1.5HP” is in sale since Monday, April 1, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “jamaris_0″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Model: Swimming Pool Pump
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Pool Type: In Ground &Above Ground
  • MPN: Does Not Apply
  • Type: Pool Pump
  • Brand: Hongmotor
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Power: 1100W/1.5HP
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification

Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US

Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US


Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US



Features: UL Certification for motor, longer lasting than those without certification High performance, energy saving motor with stainless steel shaft could stand wear and tear High efficiency, low maintenance and reliability Rugged weather-resistant construction Extremely quiet operation Transparent cover helps to judge if the basket needs clean or not Massive strainer basket holds extra capacity Suggested Installation: 24″-26″ sand filter and above-ground pools Specifications: Horsepower: 1.5 HP Speed: 3450 RPM Dual voltage: 110-120V/220-240V Max. Flow: 6500 GPH Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius) Power Cord: 59 Package Contents: 1x 1.5HP Dual voltage Swimming Pool Pump. Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation. Problem Description:The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. Solution: When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. Problem Description: Pump motor trip. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. The pump prevents the inlet from entering the water and burns the motor. Problem Description:There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. Problem Description: The Pump stop working suddenly. Our company’s products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. The item “Hayward 1.5HP In-Ground Swimming Pool Pump Motor Strainer Generic Replacemen US” is in sale since Tuesday, March 19, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “dlxzheng” and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Model: Swimming Pool Pump
  • Horsepower: 1.5hp
  • Speed: Single-Speed
  • Pool Type: In Ground &Above Ground
  • MPN: Does Not Apply
  • Type: Pool Pump
  • Brand: Hongmotor
  • Qmax: 410 L/min
  • Hmax: 15.5 Meter
  • Dual voltage: 110-120V/220-240V
  • Power: 1100W/1.5HP
  • Frequency: 60HZ
  • Color: Black
  • Certification: UL Certification